Few pics of the 3door - again
01-07-2006, 02:33 PM
#1
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: Waterlooville....near Portsmouth
Posts: 4,047
Likes: 0
Received 0 Likes
on
0 Posts
Few pics of the 3door - again
Hello peeps,
Spent the day yesterday doing lots of little jobs on the car that were overdue and today thought i would take some pics of her. I know most have seen it before but ho hum.
Spec is good stage 3 with:
Full genuine 500 kit
Hybrid T34
Dark green's
Full Samco's
Group A K&N
500 Cooler
Group A pump
S.E.C.S monitor
Front & rear Braces
High-Spec 330 kit
18" comps
Spec R breather with full braided lines
SPec-R Header
Bailley Power steering tank
Bailley washer bottle
Bailey Swirl pot
Pectal Loom
AVO coilovers front and Koni rears
Spent the day yesterday doing lots of little jobs on the car that were overdue and today thought i would take some pics of her. I know most have seen it before but ho hum.
Spec is good stage 3 with:
Full genuine 500 kit
Hybrid T34
Dark green's
Full Samco's
Group A K&N
500 Cooler
Group A pump
S.E.C.S monitor
Front & rear Braces
High-Spec 330 kit
18" comps
Spec R breather with full braided lines
SPec-R Header
Bailley Power steering tank
Bailley washer bottle
Bailey Swirl pot
Pectal Loom
AVO coilovers front and Koni rears
01-07-2006, 02:39 PM
#3
I've found that life I needed.. It's HERE!!
goddamn
lovely car.
...where are the side fenders...on the doors...the plastic bits... 
is that highspec brakes?are u happy with them...thinkin of buying big brakes for my escort cos as well.
lovely car.
...where are the side fenders...on the doors...the plastic bits... is that highspec brakes?are u happy with them...thinkin of buying big brakes for my escort cos as well.
01-07-2006, 02:43 PM
#4
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: Waterlooville....near Portsmouth
Posts: 4,047
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Pete, I know i would love a set of BBS splitys on mine.. Why oh why do they have to be so rare and expensive 
Thanks Lowman, yes thats the next thing to buy new side rubbers, they are Ł165 though so will have to wait till im feeling rich.
Thanks Lowman, yes thats the next thing to buy new side rubbers, they are Ł165 though so will have to wait till im feeling rich.
01-07-2006, 02:44 PM
#5
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: Waterlooville....near Portsmouth
Posts: 4,047
Likes: 0
Received 0 Likes
on
0 Posts
Oh and yes they are highspec as i justed added to the spec list, they work well but if i was buying again i would go for a set of 355 AP's
01-07-2006, 03:06 PM
#7
I've found that life I needed.. It's HERE!!
wow...165Ł...thats expensive..but its needed i think to get the right look of the 3 door...it breaks up the big open area on the side of the car.
but again....super nice 3 door you got there.
and ill take your advice if i buy big brakes for my escort.thanx.
but again....super nice 3 door you got there.
and ill take your advice if i buy big brakes for my escort.thanx.
Trending Topics
01-07-2006, 07:20 PM
#12
PassionFord Post Whore!!
iTrader: (1)
Join Date: May 2004
Posts: 3,923
Likes: 0
Received 0 Likes
on
0 Posts
Looks great mate-LOVE those split rims you've photoshopped 
I am having loads of 'little' issues with mine at the moment-I hope I will get to see yours this year though-maybe combe?
I am having loads of 'little' issues with mine at the moment-I hope I will get to see yours this year though-maybe combe?
01-07-2006, 07:21 PM
#13
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: Waterlooville....near Portsmouth
Posts: 4,047
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys
I agree Pete would love some, that pic above is a photoshop job i did with the wheels on my BMW. I was considering getting a 5 stud conversion and trying to make them fit but its just to much work if at all possible
Oh well, the old style comps are my second choice anyway.
I agree Pete would love some, that pic above is a photoshop job i did with the wheels on my BMW. I was considering getting a 5 stud conversion and trying to make them fit but its just to much work if at all possible
Oh well, the old style comps are my second choice anyway.
01-07-2006, 07:23 PM
#14
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: Waterlooville....near Portsmouth
Posts: 4,047
Likes: 0
Received 0 Likes
on
0 Posts
Hello Matt, sorry to hear about yours matey, your not going to be able to tomorrows meet then?
I will be going to Combe rain or shin so hope to see you there Cant wait to see yours 
I will be going to Combe rain or shin so hope to see you there
Cant wait to see yours
01-07-2006, 08:01 PM
#16
PassionFord Post Whore!!
iTrader: (1)
Join Date: May 2004
Posts: 3,923
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lamb chops
Hello Matt, sorry to hear about yours matey, your not going to be able to tomorrows meet then?
I will be going to Combe rain or shin so hope to see you there Cant wait to see yours
I will be going to Combe rain or shin so hope to see you there
Cant wait to see yours 
02-07-2006, 09:25 AM
#19
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: Waterlooville....near Portsmouth
Posts: 4,047
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys Ryan hehe they wouldnt be a patch on yours anyway mate 
Mat bummer mate just concentrate on getting it running for Combe!! Have you told Chris you wont to go as I think there are only 20 spaces on the Hants stand?
Nil will be on the Hants stand matey, come and say hi though if you see me
Ryan hehe they wouldnt be a patch on yours anyway mate Mat bummer mate just concentrate on getting it running for Combe!! Have you told Chris you wont to go as I think there are only 20 spaces on the Hants stand?
Nil will be on the Hants stand matey, come and say hi though if you see me
02-07-2006, 01:19 PM
#23
PassionFord Post Whore!!
iTrader: (1)
Join Date: May 2004
Posts: 3,923
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lamb chops
Thanks guys Ryan hehe they wouldnt be a patch on yours anyway mate
Mat bummer mate just concentrate on getting it running for Combe!! Have you told Chris you wont to go as I think there are only 20 spaces on the Hants stand?
Nil will be on the Hants stand matey, come and say hi though if you see me
Ryan hehe they wouldnt be a patch on yours anyway mate Mat bummer mate just concentrate on getting it running for Combe!! Have you told Chris you wont to go as I think there are only 20 spaces on the Hants stand?
Nil will be on the Hants stand matey, come and say hi though if you see me
03-07-2006, 09:18 PM
#29
Regular Contributor
Join Date: May 2003
Location: portsmouth . wheres all me posts gone!!!
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
Clean as ever john, like the mo's myself. Should have mine back from Ahmed this week i hope .Fixed it and had a little remap!
03-07-2006, 09:55 PM
#31
Too many posts.. I need a life!!
Join Date: Aug 2004
Location: south west
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Spent the last 2 days on my 3 dr getting it ready for castle coombe
new suspension set up and polys
lamb chop any chance i can have your front bumper????
i sooooooooooooooooooo want one
new suspension set up and polys
lamb chop any chance i can have your front bumper????
i sooooooooooooooooooo want one
03-07-2006, 10:24 PM
#33
PassionFord Post Whore!!
Thread Starter
Join Date: Apr 2004
Location: Waterlooville....near Portsmouth
Posts: 4,047
Likes: 0
Received 0 Likes
on
0 Posts
Wow loads of replys tonight, thanks guys!!
Bredan what was the problem with yours in the end? Be good to see the dam thing running again.
Thanks Ian, want to see yours running soon too mate
Mike sorry mate, not for sale did you put the coilovers on in the end?
Bredan what was the problem with yours in the end? Be good to see the dam thing running again.
Thanks Ian, want to see yours running soon too mate
Mike sorry mate, not for sale
did you put the coilovers on in the end?
