Are these any good ie do they make a lot of difference ??

are there any bad sides to fitting one of these ?

the gearbox has to come out to do the clutch so i thought maybe fitting one while its all out

not a b & m one but one of those swedish ones that woodford sells

any opinions on these at all ?

cheers...........matt

 

Not sure what make quick shift is on Porkie/my Sierra but yes, they are good

 

i have a b&m its mint. no contest

 

Mike doesn't like fitting them. (he likes willys though)

Reckons you can beat the Synchos??

 

well you just dont need 2 change as quick do u less force applyed etc

 

makes the gearbox feel alot better too by far as the std one feels like stirring rice pudding lol

 

 

TWAT roflol no i mean less force on the gearbox as your not hammering it into gear any way a deffo worth while mod in my opinion

 

I have one, it was on the car when i got it, but i've driven one without the kit and it feels terrible just becuse i'm used to it obviously. You could always chop your gearstick and if you don't like it, just weld it back together......

 

I have one, it was on the car when i got it, but i've driven one without the kit and it feels terrible just becuse i'm used to it obviously. You could always chop your gearstick and if you don't like it, just weld it back together......

 

You have to apply MORE force with a quick shift surely?? less leverage??

 

no m8 not at all nice smooth quick gearchanges nice imo well as nice as a fookin chockolate mt75 is

 

Matt, i bought one from Rayy Design.

About £45 all in.

Eay to fit once the box is out and it makes the box feel a lot better as Gus said.

Have to knock the split pin out of your original gearstick and swap the bottom half with the q/shift one.Just have to take the cradle off the box and take a bolt out a circlip off and the stick will come out of the box, easy.

Well worth doing if your box is coming off anyway.



Dave.

 

thanks guys would be good to see mr rainbums veiws on this

dave you coming to out piss up ?

 

The short shift utilises better leverage, which = shorter shift throw/quicker gearchange, the quicker the change, the more chance of beating the synchromesh (which isn't a good thing, esp. on the shonky 4x4 box) - that's the theory anyway....

This is why I haven't used one, but I have to say I've never tried one either.......

 

Yes Matt should be there .



Dave.

 

shit hot dave bring the sunroof wiring diagram with you pmsl

 

Dave.

 

ok so quickshift kit, good or bad ??????

has rally design got a web address ?

 

http://www.raldes.co.uk/

 

http://www.raldes.co.uk/

 

from what i can find i think its the same kit as what woodford supply ie just the knuckle

can anyone confirm this as i am ordering one tommorow etc

 

Yes they are good.

Only £45 iirc so cannot go wrong for that.


Dave.

 

will ring rally design tommorow

 

Wounder how long it will take you to fit it.




Dave.

 

Wounder how long it will take you to fit it.




Dave.

 

Wounder how long it will take you to fit it.




Dave.

 

im not fitting it

bloody good garage near me is doing the clutch so i will just throw that at him too !

 

give them the roof too.


Dave.

 

auto leccy is gonna do that bit before the britball i hope

 

roof is apso pice of piss a blind man can fit it

 

last question before bed lol

does that rally design shifter look like the standard one when all put back ie same leather gaitor etc ???????

 

its just the wiring gus i dont like the look of lol

 

all u need is a ignition live feed from the switch the rest can be done up there takes 10 min once the roof is fitted i put 1 in my 2wd easy

 

Yes Matt, it uses the top part of your stick and looking at it you cannot notice any difference.



Dave.

 

shit hot thanks guys for all the help