Alan 1878

Hi everyone I am Al and live near Manchester I bought focus st recently and need your help, I recently fitted a oil filter housing on my 2006 focus st as engine was doing the whistling sound, the housing was a nightmare to get out as I had already read on this forum, I didn't remove airbag and moved to the side and managed to get housing through the gap. I fitted a used but good housing and now my problem is when I started up engine light is on and dash says acceleration reduced and it won't go above 1600rpm or 15mph, I changed oil and filters when I did housing, I think I must have disturbed a wire or something
Can anyone please help

RichieST

iTrader: (2)

Check the breather hose between the housing and the cam cover. Older ones are plastic and do split, there is an updated rubber hose.

Alan 1878

Hi Richie I bought a brand new hose when I bought the housing but I didn't fit it as it was already rubber one

DangerousBryan

You need to get it plugged into a diagnostic machine to see what code is in it really.