fabrication for s1 4x4 cosworth conversion?
#1
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2003
Location: West-Side of London
Posts: 1,048
Likes: 0
Received 0 Likes
on
0 Posts
fabrication for s1 4x4 cosworth conversion?
Morning Guys,
whats the going rate for these conversion in terms of fabrication of shell and to have it all transferred over etc and built back up? So I would supply a series 1 escort rs turbo and a 4x4 sierra cosworth to the fabricator/builder. I would love to do more myself, but with a young family time is premium unfortunately.
I'm based in west London heathrow area, so who would be closest for the work and anyone got any recommendations for people skilled in this area close to me?
cheeRS in advance guys
whats the going rate for these conversion in terms of fabrication of shell and to have it all transferred over etc and built back up? So I would supply a series 1 escort rs turbo and a 4x4 sierra cosworth to the fabricator/builder. I would love to do more myself, but with a young family time is premium unfortunately.
I'm based in west London heathrow area, so who would be closest for the work and anyone got any recommendations for people skilled in this area close to me?
cheeRS in advance guys
#2
Don't ask - I don't know
iTrader: (2)
Morning chap
Fellow West London boy know it like the back of my hand
Shell done properly would be best part of 5k I'd say, and then it's labour to build the car. If it were me I'd reckon on getting through £10k minimum and that's supplying everything needed.
And there's no-one round there I know who'd do it either.
Fellow West London boy know it like the back of my hand
Shell done properly would be best part of 5k I'd say, and then it's labour to build the car. If it were me I'd reckon on getting through £10k minimum and that's supplying everything needed.
And there's no-one round there I know who'd do it either.
#4
I've found that life I needed.. It's HERE!!
iTrader: (1)
Morning chap
Fellow West London boy know it like the back of my hand
Shell done properly would be best part of 5k I'd say, and then it's labour to build the car. If it were me I'd reckon on getting through £10k minimum and that's supplying everything needed.
And there's no-one round there I know who'd do it either.
Fellow West London boy know it like the back of my hand
Shell done properly would be best part of 5k I'd say, and then it's labour to build the car. If it were me I'd reckon on getting through £10k minimum and that's supplying everything needed.
And there's no-one round there I know who'd do it either.
mark
#5
PassionFord Post Troll
Scott mcminn motorsport kilmarnock
#6
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2003
Location: West-Side of London
Posts: 1,048
Likes: 0
Received 0 Likes
on
0 Posts
Cheers for the replies guys, I know odd kids jano does them but he still a little far from me. I guess I could put the interior of it back together but would need all running gear side fabrication paint work. I think £2500 to fabricate the shell was advised to me, that sound about right ?
#7
Advanced PassionFord User
iTrader: (1)
.
I've done my own mate, i'm not a mechanic or any thing just a telephone engineer by trade but it's taken me ages (family/work etc) it is a shit load of work and really depends a lot on the state of the shell to begin with and what your end vision of the car is, mine was in really good condition and only needed to change the minor panelling.
Like MrS1 said, 5k, in my eyes that would get you a rolling shell not painted.
I've been asked to do one by a friend of a friend just to a rolling shell state and 5k from 2 cars delivered to me and one rolling out with new panels replaced etc if required is close to what I had in mind.
Mines in the Project section if you want to take a look.
Ginger
.
I've done my own mate, i'm not a mechanic or any thing just a telephone engineer by trade but it's taken me ages (family/work etc) it is a shit load of work and really depends a lot on the state of the shell to begin with and what your end vision of the car is, mine was in really good condition and only needed to change the minor panelling.
Like MrS1 said, 5k, in my eyes that would get you a rolling shell not painted.
I've been asked to do one by a friend of a friend just to a rolling shell state and 5k from 2 cars delivered to me and one rolling out with new panels replaced etc if required is close to what I had in mind.
Mines in the Project section if you want to take a look.
Ginger
.
Last edited by GINGExR2 T; 31-12-2014 at 12:36 PM.
Trending Topics
#8
I've found that life I needed.. It's HERE!!
iTrader: (1)
.
I've done my own mate, i'm not a mechanic or any thing just a telephone engineer by trade but it's taken me ages (family/work etc) it is a shit load of work and really depends a lot on the state of the shell to begin with and what your end vision of the car is, mine was in really good condition and only needed to change the minor panelling.
Like MrS1 said, 5k, in my eyes that would get you a rolling shell not painted.
I've been asked to do one by a friend of a friend just to a rolling shell state and 5k from 2 cars delivered to me and one rolling out with new panels replaced etc if required is close to what I had in mind.
Mines in the Project section if you want to take a look.
Ginger
.
I've done my own mate, i'm not a mechanic or any thing just a telephone engineer by trade but it's taken me ages (family/work etc) it is a shit load of work and really depends a lot on the state of the shell to begin with and what your end vision of the car is, mine was in really good condition and only needed to change the minor panelling.
Like MrS1 said, 5k, in my eyes that would get you a rolling shell not painted.
I've been asked to do one by a friend of a friend just to a rolling shell state and 5k from 2 cars delivered to me and one rolling out with new panels replaced etc if required is close to what I had in mind.
Mines in the Project section if you want to take a look.
Ginger
.
so about 20k finished ready to drive
mark
#9
PassionFord Post Troll
Lets say it was 5k for shell conv and 2k for paint 13k to loom it and fit engine? No way
#15
PassionFord Post Troll
#17
PassionFord Post Troll
#18
Live long and prosper!!
iTrader: (1)
lol I work in the restoration game and I takes more than 400 hours just for the metal work sometimes close to a 1000 hours and beyond. but this is on car worth a lot of money. But that said man hours is still similar whatever car you work on even a old escort. Jigging takes time,fabrication takes time and coverting to rear drive equals time.
Ever spent time removing years of underseal and shit only to find rough repairs.
It really isn't a easy job to do on a budget unless your doing it yourself.
400 plus hours is a proper prep and paint job.
Paul
#19
PassionFord Post Troll
I see what your saying paul i will be attacking the underseal on mine the tunnel and turrets all thats used from the saff grinder and wire brush attachment i supose aswell with an s1 your looking at a resto befor you start
#21
PassionFord Post Troll
Im an animal mate last time i got hold of the grinder with wire brush i imerged 12 hours later looking like fuckin pin head off hellraiser lol i thought i wore the brush out but they were just stuck to me
#23
PassionFord Post Troll
#25
PassionFord Post Troll
No mate
#27
PassionFord Post Troll
Oh thats inc donors which one is already good spec
#30
PassionFord Post Troll
I think this has aot to do with how well you do on the donor and what goodies come with as a 500+ engine with box and diffs to take it new ypur looking 15k thier?
#32
PassionFord Post Whore!!
iTrader: (5)
My car is on the cover of Fast Ford this month (January)
All in it cost me £21k and i already had a saff to start with.
That was with a mate of mine fabricating the shell and a mates rate paint job.
If I was paying someone to do all the work +VAT then only god knows what it would of set me back
All in it cost me £21k and i already had a saff to start with.
That was with a mate of mine fabricating the shell and a mates rate paint job.
If I was paying someone to do all the work +VAT then only god knows what it would of set me back
#34
PassionFord Post Troll
#35
PassionFord Post Whore!!
iTrader: (5)
Not really mate, as with most builds it was only suppose to be a toy, but I got over excited and was ploughing money into the car left right and Chelsea.
If you wanted to and I mean really wanted to, you could build one for much less than what I spent, but obviously you probably can imagine what the finished car would be like..... Pretty standard looking with a standard YB.
Which is a bit rubbish
If you wanted to and I mean really wanted to, you could build one for much less than what I spent, but obviously you probably can imagine what the finished car would be like..... Pretty standard looking with a standard YB.
Which is a bit rubbish
#36
PassionFord Post Troll
Not really mate, as with most builds it was only suppose to be a toy, but I got over excited and was ploughing money into the car left right and Chelsea.
If you wanted to and I mean really wanted to, you could build one for much less than what I spent, but obviously you probably can imagine what the finished car would be like..... Pretty standard looking with a standard YB.
Which is a bit rubbish
If you wanted to and I mean really wanted to, you could build one for much less than what I spent, but obviously you probably can imagine what the finished car would be like..... Pretty standard looking with a standard YB.
Which is a bit rubbish
Spill dem beans bwoy lol
#37
PassionFord Post Troll
The important thing to remember now is the day of a cheap saph has gone a year ago you could pick one up for just over 5 that had alot more spent on it hard to find now
#39
PassionFord Post Troll