engine conversion
#1
Virgin
Thread Starter
Join Date: Jun 2014
Location: telford
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
engine conversion
Hi guys I'm new to the page and this is my first post. I have recently been given a x reg fiesta 1.25 zetec and was thinking about doing an engine conversion in it so I can have it as a track car. I know the 1.7 puma engines go in with little work but I am looking for something with a little more power possibly something turbo charged I want to achive around 200-250 bhp I am doing the car on abit of a budget but I don't mind forking out up to £1000 for the engine I can deal with a little bit of welding and fabrication to make it fit. Has anyone got any recommendations on what I could go for or what has been done in the past? Thanks in advance for any help.
#5
PassionFord Post Whore!!
If you wanna zetec turbo it your gonna have to increase your budget somewhat, your gonna need new management and all the other parts to make it work.
Trending Topics
#9
PassionFord Post Whore!!
Do they even sell forged pistons for that engine with a suitable compression ratio?
The 2.0 zetec is usually looked upon as a easier starting point.
The 2.0 zetec is usually looked upon as a easier starting point.
#11
I'm Finding My Feet Here Now
Tight but will fit (in the process of doing one myself) if u use a 1.3 endura gear box you can keep the same gearbox mounts and driveshafts and will only need to make a mount for the drivers side
#13
I've found that life I needed.. It's HERE!!
the 2k kit gives you around 200bhp and 200lb/ft.
Which with the 2k kit you would need to also get it mapped and fit it all your self.
#15
I've found that life I needed.. It's HERE!!
#16
10K+ Poster!!
Thread
Thread Starter
Forum
Replies
Last Post