Poom

Hi Guys,

I know the firing order but on the dizzy cap which one is 1,2,3,4 and which is 1,2,3,4 on the head?

Thanks

ps. I have an idea but I just want to confirm it first

boost mad

iTrader: (8)

one is closest to the headlights

Poom

So it is one on the top left if you were looking straight at it? Then 2 is top right, 3 bottom left and 4 bottom right?

boost mad

iTrader: (8)

sorry, i was thinking for the rong car lol

Rich_w

IIRC theres a small cut out mark on the dizzy under the cap. So when the rotors pointing to that its on no1.

boost mad

iTrader: (8)

firing order is 1/3/4/2 im the engine, number one cylinder is crank pulley end, looking at it from dizzy side the top left is number one

RST Seeker

Not 100% sure m8... but looking from it stright on.. the top left in the first Hole.. top right is the secound.. bottem left 3rd.. bottem right 4th.. the bigger lead of the lot is deffo the 4th


feel free to slag me off if wrong lol

Poom

So it goes 1st cylinder to 1 on the dizzy
2nd to 3
3rd to 4
4th to 2?

Is that right?

It starts but something is wrong

RST Seeker

No No.. the way i think it is...

do this..

Take all the leads off.. and lay them next to each other.. take the longest lead and jam it in the 4th cylinder to 4th dizzy..

then the longer one of the leads next.. jam that into the 3rd Cylinder.. and put it in the the dizzy socket below the first one u put in..

the other longer of the 2 leads.. stick that in the 2nd cylinder.. and stick it in the dizzy cap next to the 1st one..

the last lead.. well.. stick that into the remaining holes.. and see what happens.. (which would be the 4th one obviously)

Poom

Done it now...what a cunt it was!