General Car Related Discussion. To discuss anything that is related to cars and automotive technology that doesnt naturally fit into another forum catagory.

omex running problems

Thread Tools
 
Search this Thread
 
Old 13-07-2013, 12:43 AM
  #1  
caprizetec170
Too many posts.. I need a life!!
Thread Starter
 
caprizetec170's Avatar
 
Join Date: Nov 2009
Location: ireland
Posts: 776
Received 0 Likes on 0 Posts
Default omex running problems

Im having a problem on a zetec turbo running an omex 600 ecu which uses a MAP and TPS for load ,
car ran fine on it when was last run over 2 years ago, but now all it will do if fire up idle for 10 seconds
Its like its just running on cranking fuel then the injectors are not firing after that
Any help would be great
Old 13-07-2013, 07:45 AM
  #2  
Gordon1
Too many posts.. I need a life!!
 
Gordon1's Avatar
 
Join Date: Oct 2004
Location: leicester
Posts: 718
Likes: 0
Received 0 Likes on 0 Posts
Default

did you make the loom or is the loom from omex
Old 13-07-2013, 08:16 AM
  #3  
caprizetec170
Too many posts.. I need a life!!
Thread Starter
 
caprizetec170's Avatar
 
Join Date: Nov 2009
Location: ireland
Posts: 776
Received 0 Likes on 0 Posts
Default

No its an omex loom. used to run fine before was removed for restro, and changed from super charger to turbo
Old 13-07-2013, 08:23 AM
  #4  
Gordon1
Too many posts.. I need a life!!
 
Gordon1's Avatar
 
Join Date: Oct 2004
Location: leicester
Posts: 718
Likes: 0
Received 0 Likes on 0 Posts
Default

is fuel pump still running ?
have you had laptop on it when you start it ?
Old 13-07-2013, 09:28 AM
  #5  
stevieturbo
C**t
 
stevieturbo's Avatar
 
Join Date: Oct 2003
Location: Norn Iron
Posts: 7,928
Received 259 Likes on 238 Posts
Default

Originally Posted by caprizetec170
Im having a problem on a zetec turbo running an omex 600 ecu which uses a MAP and TPS for load ,
car ran fine on it when was last run over 2 years ago, but now all it will do if fire up idle for 10 seconds
Its like its just running on cranking fuel then the injectors are not firing after that
Any help would be great
I think you need to detail any changes that have been made. They could affect running.

As could injectors having sat for two years...they could have failed during that time ( strange, but Ive seen it a lot lately )
Likewise, the fuel in the tank could be deemed unfit for use after that time. Although I'd have thought it should still start.

From my last two points, it would seem that modern fuel is dung if left for extended periods.

You need to establish whether the problem is ecu related, or a mechanical problem. DO you have spark when cranking ? Are you getting a trigger to the injectors ? Can you hook up a laptop to the ecu to take some readings ?
Old 13-07-2013, 10:24 AM
  #6  
caprizetec170
Too many posts.. I need a life!!
Thread Starter
 
caprizetec170's Avatar
 
Join Date: Nov 2009
Location: ireland
Posts: 776
Received 0 Likes on 0 Posts
Default

Originally Posted by stevieturbo
I think you need to detail any changes that have been made. They could affect running.

As could injectors having sat for two years...they could have failed during that time ( strange, but Ive seen it a lot lately )
Likewise, the fuel in the tank could be deemed unfit for use after that time. Although I'd have thought it should still start.

From my last two points, it would seem that modern fuel is dung if left for extended periods.

You need to establish whether the problem is ecu related, or a mechanical problem. DO you have spark when cranking ? Are you getting a trigger to the injectors ? Can you hook up a laptop to the ecu to take some readings ?
Ya the injectors are firing as is the coil when cranking, tank has been cleaned fresh petrol added, pump runs to prime it then cuts back in when it fires?
finally found an old laptop with serial port. Tps sensor is working within paramitors as is air temp and water temp sensor.
Re installed map just incase still no difference
Old 13-07-2013, 10:40 AM
  #7  
stevieturbo
C**t
 
stevieturbo's Avatar
 
Join Date: Oct 2003
Location: Norn Iron
Posts: 7,928
Received 259 Likes on 238 Posts
Default

Originally Posted by caprizetec170
Ya the injectors are firing as is the coil when cranking, tank has been cleaned fresh petrol added, pump runs to prime it then cuts back in when it fires?
finally found an old laptop with serial port. Tps sensor is working within paramitors as is air temp and water temp sensor.
Re installed map just incase still no difference
Pump will prime on key on. Pump will run after that only when the ecu sees the crank turning.

So you have visually confirmed fuel is being fired out the injectors ?

You have confirmed a good strong spark, and that the spark is fired at a sensible time to allow starting ( need a timing light )

With laptop connected, all sensors read normal, and when cranking you are getting an rpm signal ?

Are the plugs wet or dry ?

Does the engine make any attempt at all to fire ?
Old 13-07-2013, 06:45 PM
  #8  
caprizetec170
Too many posts.. I need a life!!
Thread Starter
 
caprizetec170's Avatar
 
Join Date: Nov 2009
Location: ireland
Posts: 776
Received 0 Likes on 0 Posts
Default

Thanks for replies sorted now stupid faulty ebey map sensor
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wheelwizardrefurbs
Technical help Q & A
20
23-09-2015 09:14 PM
jay030787
Ford Escort RS Turbo
27
18-09-2015 07:34 PM
ekjim
General Car Related Discussion.
6
17-08-2015 08:57 PM
Zoggon
Ford Sierra/Sapphire/RS500 Cosworth
5
10-08-2015 10:39 AM
turbobill
Technical help Q & A
3
09-08-2015 05:21 PM



Quick Reply: omex running problems



All times are GMT. The time now is 07:25 PM.