Right, just out to pick up some juicy WRC parts

but while im out can you guys discuss how the front diff is removed from the block?

i can see a few bolts but after that, does it pull off? or is there a retaining clip inside as per the driveshaft

diff pan is off


cheers guys

Dave

 

just three bolts and it pulls off mate, might be a bit tight tho

 

i assume u putting on a diff plate, or you doing it properly with a propper front diff,

 

2 replies is that it you bastards!

cheers nick.. engine is out so shouldnt be a prob

ranj, im having a new engine built

dont know who by yet!

 

3 or 4 bolts easy tap with hammer job done

 

your all wrong cos the diff doesnt bolt to the block!

 

schweet

gus are you having an engine built by stu? im thinking hard about it

 

sump kev sump

 

sump then kev you spoon

 

we will be building my next and he/we built my last and it was a flyer dont think just do it you will not regret it

 

as said undo the 3 bolts and pull it out you plank!