Anyone know the flow rate in CC/Min and the impedance?

I'm Megasquirting my Yamaha FZR1000 and need some high impedance injectors that can flow to around 230 crankshaft BHP, EEC1V EsCos ones seem really hard to get hold of secondhand

cheeRS

Mark

 

cross reference the number on the injector with the table on this site http://users.erols.com/srweiss/tableifc.htm

 

Thanks for the link mate
Trouble is I have not bought any yet so don't know the numbers
I really need to know if they are capable of supplying enough fuel before getting any.

cheeRS

Mark

 

i'll let you know when i get back to my own pc, got some injector codes, colours n flow rates on there

 

Beige 701's are expensive and not very good. Try some Corrado greens, or Audi S2 Turbo injectors - they go on german ebay for cheap. They flow a little more than 701s and are also about 16 Ohm. 365cc or 440cc are also available for a reasonable price. Cali Turbo injectors are another option.

701 = 240cc IIRC.

 

Chears mate

Beige ones are too small acording to the Megasquirt site

http://www.megasquirt.info/manual/minj.htm

I need around 350cc/min if the above is correct.

Mark