please help regarding boost problem
#43
10K+ Poster!!
Thread Starter
iTrader: (3)
Join Date: Jun 2003
Location: Hartlepool
Posts: 10,956
Likes: 0
Received 0 Likes
on
0 Posts
Right I've tried it today a by easing the throttle in 4th and 5th and I've also tried it with vacuum pipe from boost controller to turbo disconnected, and yep its still the same grrrr
#44
PassionFord Post Whore!!
#45
For you to loose 1/2 your boost it must be a huge leak in the TB??
When you loose the boost how does the car run? Rough or quite well considering?
More importantly, how did you do the leak test and what pressure did you use.
#46
10K+ Poster!!
Thread Starter
iTrader: (3)
Join Date: Jun 2003
Location: Hartlepool
Posts: 10,956
Likes: 0
Received 0 Likes
on
0 Posts
When the boost drops car still runs fine, to do the leak test we took filter off and blocked off the hose then plumber a t piece into the vacuum hose going to inlet and used compressor to fill the system. Got up to just over 1bar on boost gauge and leak was significant so i dread to think what it will be like at 2bar.
Mark i dont think a cossie style actuator will fit, im gonna fit standard inlet back on and see what its like.
Mark i dont think a cossie style actuator will fit, im gonna fit standard inlet back on and see what its like.
#47
When the boost drops car still runs fine, to do the leak test we took filter off and blocked off the hose then plumber a t piece into the vacuum hose going to inlet and used compressor to fill the system. Got up to just over 1bar on boost gauge and leak was significant so i dread to think what it will be like at 2bar.
Mark i dont think a cossie style actuator will fit, im gonna fit standard inlet back on and see what its like.
Mark i dont think a cossie style actuator will fit, im gonna fit standard inlet back on and see what its like.
You must take the system or attempt to take the system up to the pressure you are using on the road.ie 2 bar.
Thread
Thread Starter
Forum
Replies
Last Post
JK12
Pictures, video & Photoshop Forum
33
26-04-2021 12:09 PM