co setting with MSD closed loop ?
Trending Topics
Thread Starter
Professional Waffler
iTrader: (4)
Joined: May 2004
Posts: 25,439
Likes: 19
From: Shutting down jap crap
PassionFords Creator
iTrader: (12)
Joined: May 2003
Posts: 28,824
Likes: 95
From: Blackpool, UK Destination: Rev limiter
Kev,
Turn your CO screw 5 turns clockwise then 2 turns anti clockwise, then check your CO with engine hot and fans off, expect sub 1% but up to 1.5% is fine. Feel free to tweak co screw by up to 1 full turn eoither way from that position (Which is dead central) Never go further or expect idle problems, especially when cold.
Turn your CO screw 5 turns clockwise then 2 turns anti clockwise, then check your CO with engine hot and fans off, expect sub 1% but up to 1.5% is fine. Feel free to tweak co screw by up to 1 full turn eoither way from that position (Which is dead central) Never go further or expect idle problems, especially when cold.
Thread Starter
Professional Waffler
iTrader: (4)
Joined: May 2004
Posts: 25,439
Likes: 19
From: Shutting down jap crap
Kev,
Turn your CO screw 5 turns clockwise then 2 turns anti clockwise, then check your CO with engine hot and fans off, expect sub 1% but up to 1.5% is fine. Feel free to tweak co screw by up to 1 full turn eoither way from that position (Which is dead central) Never go further or expect idle problems, especially when cold.
Turn your CO screw 5 turns clockwise then 2 turns anti clockwise, then check your CO with engine hot and fans off, expect sub 1% but up to 1.5% is fine. Feel free to tweak co screw by up to 1 full turn eoither way from that position (Which is dead central) Never go further or expect idle problems, especially when cold.
Thread
Thread Starter
Forum
Replies
Last Post
JK12
Pictures, video & Photoshop Forum
33
Apr 26, 2021 12:09 PM
Steve Escos
Ford Focus ST Parts for Sale
6
Sep 2, 2019 11:39 PM