Car wont start its stuck at the body shop??elp
#1
Car wont start its stuck at the body shop??elp
Right they thin they may of trigged the fuel cut out but we cant find it ive looked in pasy side foot well etc cant se it the fuel pump makes no noise t all?? clifford alarm too any suggestions on where to lok and what to check??? I want my car back
#6
Originally Posted by Doug Stirling
On Es Cos the inertia switch is in the passenger footwell........near the ECU
Wonder if it's anything to do with it having been converted from small to large turbo?
Trending Topics
#9
LOL saff running gear lol u nutta its got a safy 4x4 head on it and rocker cover and l8 every thing else is ecos lol soon to all be changed any way.They have been tho the car both footwells and the boot sems still no joy
#10
Also, it could be the Ford (Factory fitted) immobiliser...........Out of sync with the after market alarm/central locking.
Lock the car with the key (drivers door), do the anti-clockwise then clockwise FULL dead lock procedure with the key (to set the factory alarn and dead locking), then, ues the KEY to open the car/unset the Ford arlarm............ONLY THEN set/unset the after market alarm/imobiliser......worth a try
Lock the car with the key (drivers door), do the anti-clockwise then clockwise FULL dead lock procedure with the key (to set the factory alarn and dead locking), then, ues the KEY to open the car/unset the Ford arlarm............ONLY THEN set/unset the after market alarm/imobiliser......worth a try
#12
is your concept 600 running that wireless fuel cut off imobiliser ting ?
i thought your loom was spliced with a 4x4 saph loom ? fuel pump setup is different too have you looked under the car ?
i thought your loom was spliced with a 4x4 saph loom ? fuel pump setup is different too have you looked under the car ?
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM
CabrioTurbo
General Car Related Discussion.
1
01-08-2015 11:04 AM