Exhaust headers for a V8, anyone on here?Reasonable timeframe required!!
#1
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Need some manifolds making up for the Firenza, anyone on here able to do a good job at sane money or have a contact that can? Preferably stainless.
Last edited by Martin-Hadland; 31-10-2010 at 07:44 PM.
#6
Advanced PassionFord User
Join Date: Jun 2003
Location: Berkshire
Posts: 2,435
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
speak to andy robinson drag raceing in basingstoke http://www.robinson-race-cars.co.uk/
he makes a lovely set but you didn't fancy selling a kidney to fund them....
you could probably buy a kit from the states, bends/flanges etc , try summit racing
Huey at Spot on control cables (0118 9737973) makes headers for bike turbo conversions and could make you a set, Simpsons of Slough could too.
#7
Advanced PassionFord User
Join Date: Jun 2003
Location: Berkshire
Posts: 2,435
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
PassionFord Regular
Join Date: Feb 2007
Location: exeter
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
James at jek Fabrications have seen loads he's done for the 20v turbo vags look very nice he is also the guy doing the ford motorsport replicas for the focus Rs boys
he is based in somerset thou martin good guy and very into his work and the scene.
Removed his number as I have a feeling it may be his personal one!
Pm me if you need it martin!
he is based in somerset thou martin good guy and very into his work and the scene.
Removed his number as I have a feeling it may be his personal one!
Pm me if you need it martin!
Last edited by groomers; 27-10-2010 at 07:26 PM. Reason: Delete phone no
#13
just finding my feet
![Default](https://passionford.com/forum/images/icons/icon1.gif)
have you tried blue oval garage pmsl
seriously what about that guy with the fiesta cosworth he seemed to make a decent exhaust aswell but cant remember his username
seriously what about that guy with the fiesta cosworth he seemed to make a decent exhaust aswell but cant remember his username
#15
10K+ Poster!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
These guys
http://www.thermallogic.co.uk/
Based in Finedon, near Andy Robinson and Hauser, they did Frayz's exhaust on his Subaru
https://passionford.com/forum/restor...ne-loom-7.html
http://www.thermallogic.co.uk/
Based in Finedon, near Andy Robinson and Hauser, they did Frayz's exhaust on his Subaru
https://passionford.com/forum/restor...ne-loom-7.html
#16
cossie fan (unluckerly)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
These guys
http://www.thermallogic.co.uk/
Based in Finedon, near Andy Robinson and Hauser, they did Frayz's exhaust on his Subaru
https://passionford.com/forum/restor...ne-loom-7.html
http://www.thermallogic.co.uk/
Based in Finedon, near Andy Robinson and Hauser, they did Frayz's exhaust on his Subaru
https://passionford.com/forum/restor...ne-loom-7.html
#17
Too many posts.. I need a life!!
Join Date: Jun 2007
Location: Manchester
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Couple more you could try.
http://www.btbexhausts.co.uk/ based in Northants
and
JP exhausts
http://www.jpexhausts.co.uk/ based in Macclesfield
I have good experience of both companies and their work is spot on!
http://www.btbexhausts.co.uk/ based in Northants
and
JP exhausts
http://www.jpexhausts.co.uk/ based in Macclesfield
I have good experience of both companies and their work is spot on!
#18
10K+ Poster!!
#21
![Default](https://passionford.com/forum/images/icons/icon1.gif)
He made mine and did a superb job.
What space issues do you have ?
Initially I bought a few cheap mild steel sets until I found one that was close. Passenger side was no problem, drivers was a nightmare.
I modified the mild steel drivers side and used it for a year or so. Then got Lance to make a proper set in stainless.
But depending where you need them to go, there might be something off the shelf. The Corvette stuff usually sits tighter into the block than Camaro or GTO ( Monaro )
On egay you can buy pretty cheap stainless manifolds from US or Oz too.
He has more recently made a new centre section for my car ( just at the weekend there actually )
He used a pair of Magnaflow silencers that I supplied for the middle. I'll look into the rear section at a later date, as just didnt have time to do anything more in the 2 days I had booked in.
Either way, I think it turned out great. I supplied V-bands so it could be taken apart in a matter of minutes if needed.
Also included a snap of a pair of demo manifolds he had lying about. The standard of work is amazing. photos may not do it justice.
The manifolds have been on for a few years now so dont look like much. The workmanship is second to none.
![](http://img5.imageshack.us/img5/9058/dsc04015medium.jpg)
Uploaded with ImageShack.us
![](http://img32.imageshack.us/img32/3821/dsc04017medium.jpg)
Uploaded with ImageShack.us
![](http://img294.imageshack.us/img294/7830/dsc04019medium.jpg)
Uploaded with ImageShack.us
![](http://img24.imageshack.us/img24/5608/dsc04020medium.jpg)
Uploaded with ImageShack.us
![](http://img841.imageshack.us/img841/9962/dsc04024medium.jpg)
Uploaded with ImageShack.us
Last edited by stevieturbo; 27-10-2010 at 10:47 PM.
#30
Advanced PassionFord User
![Default](https://passionford.com/forum/images/icons/icon1.gif)
hi martin i could help you out and as ive built a few turbo manifolds so na shouldnt be a problem , i use lance at ojz engineering for my pipes and he is very good , the only thing really that effects the prices are if your using merge collectors as they aint cheap to buy. drop me a pm later if you want
ps i built luca manifold and a few more
cheers paul
ps i built luca manifold and a few more
cheers paul
#31
![Default](https://passionford.com/forum/images/icons/icon1.gif)
hi martin i could help you out and as ive built a few turbo manifolds so na shouldnt be a problem , i use lance at ojz engineering for my pipes and he is very good , the only thing really that effects the prices are if your using merge collectors as they aint cheap to buy. drop me a pm later if you want
ps i built luca manifold and a few more
cheers paul
ps i built luca manifold and a few more
cheers paul
#33
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Your problem is very similar to my own. Steering arm passed right through where most header pipes fell.
Send me a direct email and I'll forward photos of my own, and I could maybe send you my mild steel RHS manifold to trial. It would then give you an idea of what is needed. Lance actually made a jig around mine as I wasnt able to give the car to him.
But the problem is very similar
But basically this is it. Cheap Pacesetter Camaro manifold with the front two tubes modified by me. These are 1.75" OD tubes. The stainless ones I had made by Lance are 2"
![](https://img801.imageshack.us/img801/4346/img0280large.jpg)
![](https://img541.imageshack.us/img541/2969/img0274large.jpg)
Cheapest fix would be some early 97/98 cast manifolds. Pretty sure they would fit no probs, but obviously be pretty crap.
This is a pic of the new 2" header, which was even trickier to fit !! 1.75" will be ideal for you though
![](https://img339.imageshack.us/img339/5255/dsc00171large.jpg)
Send me a direct email and I'll forward photos of my own, and I could maybe send you my mild steel RHS manifold to trial. It would then give you an idea of what is needed. Lance actually made a jig around mine as I wasnt able to give the car to him.
But the problem is very similar
But basically this is it. Cheap Pacesetter Camaro manifold with the front two tubes modified by me. These are 1.75" OD tubes. The stainless ones I had made by Lance are 2"
![](https://img801.imageshack.us/img801/4346/img0280large.jpg)
![](https://img541.imageshack.us/img541/2969/img0274large.jpg)
Cheapest fix would be some early 97/98 cast manifolds. Pretty sure they would fit no probs, but obviously be pretty crap.
This is a pic of the new 2" header, which was even trickier to fit !! 1.75" will be ideal for you though
![](https://img339.imageshack.us/img339/5255/dsc00171large.jpg)
![](https://img36.imageshack.us/img36/2448/dsc00181large.jpg)
Last edited by stevieturbo; 28-10-2010 at 11:04 AM.
#39
20K+ Super Poster.
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Could always try Nick Paravani, uses all the exotic materials as well if customer wants but will only do by recommendations from some people, I can ask him if you want ?
Done this at all levels, does mostly historic stuff these days but all the exotica cars as well.
tabetha
Done this at all levels, does mostly historic stuff these days but all the exotica cars as well.
tabetha