rstoughy

iTrader: (5)

Ok i know this has been covered 100's of times over the years but having done a search im still getting contradicting answers.

1. I am going to fit a 4x4 pump and pick up to my 3 door.
2. I am using a std 2wd sump with one of Tony (TCS) gated baffles fitted.

Can anyone give me a yes or no as to whether this will be fine?

Some folk saying cool no problems and others saying i need to get the grinder out and make room for the spray bar etc.

Be nice if someone has already done this

Cheers,

mattman1234

i have a 4wd pump in a 2wd sump,its on a 200 block,not sure if is different from the 205 at the bottom.You have to bend the strainer up a bit,but keeping it flat.

mattman1234

rstoughy

iTrader: (5)

Cool cheers mate

It's a 200 block (ST Escos engine) just that i'm putting it in my 3 door so will be fitting the 2wd sump.

thanks,

Richie.

iTrader: (5)

ST Escos engine has oil squirters instead of spray bar Paul

Toe Knee

iTrader: (2)

on mine from memory on the standard baffle i had to grind a chunk out of it to fit, ive got a TCS baffle too but not fitted it yet!!

rstoughy

iTrader: (5)

.

rstoughy

iTrader: (5)

Richie,
Thank you for that reminder

Have them sitting in a little pot awaiting fitting so that now makes this question null and void LOL.

2wd pump and pickup it is

to the members of PF again

The DIVA

iTrader: (3)

Paul.... I use an uprated pinto pump and a 2wd pickup with the spraybar removed on my ST escos blocks

rstoughy

iTrader: (5)

Take it that works fine Rob?

Why the Pinto pump? I'm guessing its cheaper (which is good as i'm a Scot)