calling all zetec turbo people!
#6
PassionFord Post Whore!!
Trending Topics
#10
Advanced PassionFord User
both engines responed well to being heavily modified and turbo'd.
silver top engine has far bigger mains caps which makes the bottom end slightly stronger as standard.
the black top engine has a baffled sump as standard , very slightly better flowing head until you have the area six ultimate head then theres hardly no difference , people will say rod ratio etc but just get rods to suit your needs.
oil pumps are a massive issue and the black top has had billet gears made so they are very strong
also you can buy billet mains caps for the black top but theres some machining work involved.
all these parts will cost more money on top and can be expensive.
when i asked ian howell which engine he preferes he says the silver top and hes the man to listen to
silver top engines have come up with the numbers etc and theres more silvertops running big bhp than blacktops
sunnys 460+bhp silvertop
mine 522bhp silvertop
dan arrowsmiths 536bhp silvertop
paul johnsons 500+bhp silvertop bottom end / blacktop head (major work mating the 2 together)
will gallops 660bhp blacktop (rallycross unlimited budget not what the average person can afford)
i think theres not alot in it but the blacktop is readily available
hope this helps
cheers paul
silver top engine has far bigger mains caps which makes the bottom end slightly stronger as standard.
the black top engine has a baffled sump as standard , very slightly better flowing head until you have the area six ultimate head then theres hardly no difference , people will say rod ratio etc but just get rods to suit your needs.
oil pumps are a massive issue and the black top has had billet gears made so they are very strong
also you can buy billet mains caps for the black top but theres some machining work involved.
all these parts will cost more money on top and can be expensive.
when i asked ian howell which engine he preferes he says the silver top and hes the man to listen to
silver top engines have come up with the numbers etc and theres more silvertops running big bhp than blacktops
sunnys 460+bhp silvertop
mine 522bhp silvertop
dan arrowsmiths 536bhp silvertop
paul johnsons 500+bhp silvertop bottom end / blacktop head (major work mating the 2 together)
will gallops 660bhp blacktop (rallycross unlimited budget not what the average person can afford)
i think theres not alot in it but the blacktop is readily available
hope this helps
cheers paul
Last edited by zetaboostboy522bhp; 13-12-2009 at 07:37 PM.
#11
Advanced PassionFord User
get the name right prick , oh sorry i mean rick .
i aint bigging the silvertop up hes asking for pros and cons which i have said about both engines , but my engine is provern , what you done with the zetec engine , oh yeh fook all and seeing as ian howell is the best zetec tuner in the country by a mile then i will listen to people who have achieved something not just talked shit ,
this is coming from a man who said that he didnt think ian was a good engineer lol.
we will race mate when my cars finished to see which is fastest
cheers paul
i aint bigging the silvertop up hes asking for pros and cons which i have said about both engines , but my engine is provern , what you done with the zetec engine , oh yeh fook all and seeing as ian howell is the best zetec tuner in the country by a mile then i will listen to people who have achieved something not just talked shit ,
this is coming from a man who said that he didnt think ian was a good engineer lol.
we will race mate when my cars finished to see which is fastest
cheers paul
#13
I've found that life I needed.. It's HERE!!
Join Date: Sep 2009
Location: kent
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
#17
I've found that life I needed.. It's HERE!!
Join Date: Sep 2009
Location: kent
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
im only hoping 4 350 so no need i guess.
aint the standard oil pump fine for any amount of power as long as u dnt go over 7200rpm?
aint the standard oil pump fine for any amount of power as long as u dnt go over 7200rpm?
Last edited by focusrrx87; 13-12-2009 at 06:58 PM.
#18
Advanced PassionFord User
#20
Advanced PassionFord User
so people say mate, its all down to luck as i reved my engine to 7500rpm on the silvertop pump and everything was fine and i think sunny ran his upto 8200rpm with no fail , but ask luca he was the unlucky one and for the sake of Ł100 i think its a worth while mod that could save you your engine.
cheers paul
#21
ZETEC TURBO
iTrader: (1)
so people say mate, its all down to luck as i reved my engine to 7500rpm on the silvertop pump and everything was fine and i think sunny ran his upto 8200rpm with no fail , but ask luca he was the unlucky one and for the sake of Ł100 i think its a worth while mod that could save you your engine.
cheers paul
cheers paul
#23
Advanced PassionFord User
#27
Advanced PassionFord User
#28
I've found that life I needed.. It's HERE!!
Join Date: Sep 2009
Location: kent
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
#30
I've found that life I needed.. It's HERE!!
Join Date: Sep 2009
Location: kent
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
how hard is it to change the gears ur self?
#31
Advanced PassionFord User
#32
I've found that life I needed.. It's HERE!!
Join Date: Sep 2009
Location: kent
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
#36
ZETEC TURBO
iTrader: (1)
yeh its worth geting the head done as then later when you want more power its already done, a gt25 off a focus rs will do 300 but wil be on its limit or a gt28 and if you have room in your wngine bay you could use a t34, ime runing pectel t2 managment and so are most of the people who have posted in this thread and if i was building up a new setup i would still use pectel t2
what mk fiesta is it going to go in?
Last edited by robp-tt; 13-12-2009 at 08:13 PM.
#39
neeeeeeeeooowmmmm
iTrader: (2)
yeh its worth geting the head done as then later when you want more power its already done, a gt25 off a focus rs will do 300 but wil be on its limit or a gt28 and if you have room in your wngine bay you could use a t34, ime runing pectel t2 managment and so are most of the people who have posted in this thread and if i was building up a new setup i would still use pectel t2
what mk fiesta is it going to go in?
what mk fiesta is it going to go in?