Time of Year Again Track Cars, Who's got what this year
#1
PassionFord Post Whore!!
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: Bournemouth, Poole, Dorset
Posts: 4,542
Likes: 0
Received 1 Like
on
1 Post
Time of Year Again Track Cars, Who's got what this year
As we did a bit of work on ours last few weeks, just wondering what people will be running this year.
The Gooooon, was put on the rollers and after a ball ache sorting out some electrical issues and a split dump valve diaphram off one of the carbs we got a good result
250bhp @ 5800RPM
270ftlb of Torque at 3500rpm
Running 22psi Boost on a T3.48
AFRS in low 11s from 3600rpm and above, however
Lows 8s below 3000rpm, but cant be helped with turbos and carbs
The car weighs in at800kg but after out track day next week, its getting polycarbed so should be around 780kg.
Brake Bias box is in with big thanks to NUTS so roll on 2009.
Couple of Pics, the manifold in the bottom picture cam out pink on camera phone
The Gooooon, was put on the rollers and after a ball ache sorting out some electrical issues and a split dump valve diaphram off one of the carbs we got a good result
250bhp @ 5800RPM
270ftlb of Torque at 3500rpm
Running 22psi Boost on a T3.48
AFRS in low 11s from 3600rpm and above, however
Lows 8s below 3000rpm, but cant be helped with turbos and carbs
The car weighs in at800kg but after out track day next week, its getting polycarbed so should be around 780kg.
Brake Bias box is in with big thanks to NUTS so roll on 2009.
Couple of Pics, the manifold in the bottom picture cam out pink on camera phone
#4
orion=mini saff
iTrader: (3)
Join Date: Jun 2003
Location: suffolk Drives:orion mk2 zetec
Posts: 3,505
Likes: 0
Received 2 Likes
on
2 Posts
pukka maestro my friend had one with a sticker in it saying
"most maestros suck, mine BLOWS!"
im gonna be tearing up the track in a 1.8 n/a orion to watch out
zetec turbo wont be ready in time
"most maestros suck, mine BLOWS!"
im gonna be tearing up the track in a 1.8 n/a orion to watch out
zetec turbo wont be ready in time
Trending Topics
#16
PassionFord Post Whore!!
Join Date: May 2004
Location: your mums bed
Posts: 9,814
Likes: 0
Received 0 Likes
on
0 Posts
#17
PassionFord Post Troll
iTrader: (1)
been slowly getting my s1 sorted over the passed 14 months it goes to nms next week for a few final tweeks and mapping not got a clue on power be happy with anythink over 250bhp.enging spec is low comp steel bottomend,t34,newman cam kit,grs rad&cooler,cossie management,cossie dark blue`s.possible thinking about gas aswell but not sure yet.also it will be tiger striped some time this year if car stays together long enuff
Last edited by cressy; 23-03-2009 at 12:33 PM.
#21
PassionFord Post Whore!!
iTrader: (6)
Join Date: May 2004
Location: warrington
Posts: 8,651
Likes: 0
Received 0 Likes
on
0 Posts
my bmw m3 has had a bit of a freshen up.....
new inlet manifold seals,new fuel lines,fuel filter,fuel pressure reg,air flow meter and lamda sensors....
just done 315 bhp on rollers
ready to abuse again this year.
out on satyurday 4th april at oulton park and cant wait.
new inlet manifold seals,new fuel lines,fuel filter,fuel pressure reg,air flow meter and lamda sensors....
just done 315 bhp on rollers
ready to abuse again this year.
out on satyurday 4th april at oulton park and cant wait.
#23
Black Country RSOC
Join Date: Oct 2005
Location: Stourbridge
Posts: 2,282
Likes: 0
Received 0 Likes
on
0 Posts
My trusty Nissan Primera eGT will be doing the rounds this year, much as its done for the last 2 years.
Got some new MO's for it, purely so i can get some 330mm AP's under it as the year progresses
Got some new MO's for it, purely so i can get some 330mm AP's under it as the year progresses
#24
I've found that life I needed.. It's HERE!!
Join Date: Nov 2006
Location: Rotherham
Posts: 1,398
Likes: 0
Received 0 Likes
on
0 Posts
Daft as it sounds you could probably do ok on the handling track at TOTB, unless every1s turned away from speed this year
#27
PassionFord Post Troll
iTrader: (1)
yes mate the jamsport s2 always seems togo well.my mate has s2 very similair spec to what mine is and if it`s anywere near that i`ll be happy
Daft as it sounds you could probably do ok on the handling track at TOTB, unless every1s turned away from speed this year
i know vauxhall`s rule at totb
#33
Regular Contributor
I'm trying to get my car built for the summer, i can't wait to start tracking it!
Hayabuser powered Smart Fortwo, should be circa 600KG with 185BHP. Going turbo next year circa 350-400bhp.
Hayabuser powered Smart Fortwo, should be circa 600KG with 185BHP. Going turbo next year circa 350-400bhp.
#35
PassionFord Post Whore!!
Join Date: May 2004
Location: Oldham + Fast Ford
Posts: 4,657
Likes: 0
Received 0 Likes
on
0 Posts
I love the Maestro GOOON!
Mine are getting there.
My FRST will be finally back once i sort a proper exhaust manifold.
The Bonus is always out.
I just bought a Puma for track 'n road.
Mine are getting there.
My FRST will be finally back once i sort a proper exhaust manifold.
The Bonus is always out.
I just bought a Puma for track 'n road.