need help fast, RS2000
#41
PassionFord Post Whore!!
iTrader: (4)
Right, lets start again shall we?
The RS 2000 DOES NOT have a MAF!!!!!!!
The problem is by taking the airbox out you have removed the ISCV, hence why it won't idle as mentioned by mikemcc03.
To be honest cone filters are pisch on 2K's(too much heatsoak), you want a replacement element in the standard box, then just drill the bottom. Good gains and it will sounds just as loud as a cone filter.
The RS 2000 DOES NOT have a MAF!!!!!!!
The problem is by taking the airbox out you have removed the ISCV, hence why it won't idle as mentioned by mikemcc03.
To be honest cone filters are pisch on 2K's(too much heatsoak), you want a replacement element in the standard box, then just drill the bottom. Good gains and it will sounds just as loud as a cone filter.
#42
PassionFORD Member
iTrader: (1)
Join Date: May 2007
Posts: 5,768
Likes: 0
Received 0 Likes
on
0 Posts
If the ISCV has been removed then it will refuse to idle and in your case start at all. Try not to go for universal jobbies and go for tailored kits which will have accounted for the ISCV. And if your engine is anything like mine, with a short ram induction kit, you will get plenty of noise and shit throttle response and take off if it suffers heatsoak. Best thing I did was getting a long ram kit especially now when it is freezing cold!
Thread
Thread Starter
Forum
Replies
Last Post
Fordmad!
Pictures, video & Photoshop Forum
15
27-09-2015 06:24 PM
truffleshuffle
Ford Sierra/Sapphire/RS500 Cosworth
1
10-09-2015 09:35 PM