The Reyland tall block engine will pop if big boost used?
#3
*** Sierra RS Custard ***
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Superb stuff
I havent been whispering anything to anyone so not really who this topic was aimed at no doubt, but even still I have certainly had doubts about how well the different materials are going to interact as they heat and cool over a period of time.
Take it that it was fucking flying then?
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
I havent been whispering anything to anyone so not really who this topic was aimed at no doubt, but even still I have certainly had doubts about how well the different materials are going to interact as they heat and cool over a period of time.
Take it that it was fucking flying then?
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
Trending Topics
#8
*** Sierra RS Custard ***
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Paul Eggleton
So did you get a top speed run out of it? If so are you prepared to disclose what you reached?
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
Like I know Rods does 180mph at .5 miles, so people would no doubt find it interesting if it was quicker or slower than that and how much by
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
Bet you were grinning like a schoolboy to finally be able to use it to its full potential Martin?
![Content](https://passionford.com/forum/images/smilies/content.gif)
#10
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Mike Rainbird
By quick gear ratio calcs, Martin should have just achieved his aim
. Obviously if he wanted them published, he would have said, so you'll have to work it out yourself
.
Well done Martin, was a long time coming
.
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well done Martin, was a long time coming
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
#13
Guest
Posts: n/a
![Default](https://passionford.com/forum/images/icons/icon1.gif)
mine supposedly does the same....8k+ and 2.3bar....i'd love to know more data if you are ready to share
i do realize though that making that tall block involved engineering problems i (harvey) never faced, thumbs up for getting that working properly
chip : u brown all over yet from creeping up peoples arses ?
michael
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
i do realize though that making that tall block involved engineering problems i (harvey) never faced, thumbs up for getting that working properly
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
chip : u brown all over yet from creeping up peoples arses ?
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
michael
#14
Wahay!! I've lost my Virginity!!
Join Date: Oct 2007
Location: prestwick
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Mike Rainbird
By quick gear ratio calcs, Martin should have just achieved his aim
. Obviously if he wanted them published, he would have said, so you'll have to work it out yourself
.
Well done Martin, was a long time coming
.
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well done Martin, was a long time coming
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
you implying that it held this in top gear?
#15
*** Sierra RS Custard ***
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by EsCosRacer
chip : u brown all over yet from creeping up peoples arses ?
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
Dont be such a twat Micheal, it doesnt suit you the way it does some people, be your own man instead.
#16
Caraholic
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by BadAss Focus
Originally Posted by Mike Rainbird
By quick gear ratio calcs, Martin should have just achieved his aim
. Obviously if he wanted them published, he would have said, so you'll have to work it out yourself
.
Well done Martin, was a long time coming
.
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well done Martin, was a long time coming
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
you implying that it held this in top gear?
#17
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Mike Rainbird
Originally Posted by BadAss Focus
Originally Posted by Mike Rainbird
By quick gear ratio calcs, Martin should have just achieved his aim
. Obviously if he wanted them published, he would have said, so you'll have to work it out yourself
.
Well done Martin, was a long time coming
.
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well done Martin, was a long time coming
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
you implying that it held this in top gear?
![007](https://passionford.com/forum/images/smilies/bond.gif)
#19
*** Sierra RS Custard ***
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Mike Rainbird
Originally Posted by BadAss Focus
Originally Posted by Mike Rainbird
By quick gear ratio calcs, Martin should have just achieved his aim
. Obviously if he wanted them published, he would have said, so you'll have to work it out yourself
.
Well done Martin, was a long time coming
.
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well done Martin, was a long time coming
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
you implying that it held this in top gear?
I suspect you have read a little too much into the wording though mike.
Either way, with that sort of boost at that sort of RPM its going to be QUICK by any standards
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#20
15K+ Super Poster!!
iTrader: (4)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by martin-reyland
Originally Posted by Mike Rainbird
By quick gear ratio calcs, Martin should have just achieved his aim
. Obviously if he wanted them published, he would have said, so you'll have to work it out yourself
.
Well done Martin, was a long time coming
.
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well done Martin, was a long time coming
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
#21
Testing the future
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Chip-3Door
Originally Posted by Mike Rainbird
Originally Posted by BadAss Focus
Originally Posted by Mike Rainbird
By quick gear ratio calcs, Martin should have just achieved his aim
. Obviously if he wanted them published, he would have said, so you'll have to work it out yourself
.
Well done Martin, was a long time coming
.
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well done Martin, was a long time coming
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
you implying that it held this in top gear?
I suspect you have read a little too much into the wording though mike.
Either way, with that sort of boost at that sort of RPM its going to be QUICK by any standards
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
don't make assumptions is the key here, i suspect
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
#22
*** Sierra RS Custard ***
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by foreigneRS
Originally Posted by Chip-3Door
Originally Posted by Mike Rainbird
Originally Posted by BadAss Focus
Originally Posted by Mike Rainbird
By quick gear ratio calcs, Martin should have just achieved his aim
. Obviously if he wanted them published, he would have said, so you'll have to work it out yourself
.
Well done Martin, was a long time coming
.
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well done Martin, was a long time coming
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
you implying that it held this in top gear?
I suspect you have read a little too much into the wording though mike.
Either way, with that sort of boost at that sort of RPM its going to be QUICK by any standards
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
don't make assumptions is the key here, i suspect
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Rev limit?
I doubt he would hold his car on the rev limiter
Chassis Dyno?
They were at brunters
On the brakes, or held upto that rpm and worded slightly weirdly?
Very possibly hence my comment to mike not to read too much into just how it was worded
#24
Testing the future
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Chip-3Door
Rev limit?
I doubt he would hold his car on the rev limiter
Chassis Dyno?
They were at brunters
On the brakes, or held upto that rpm and worded slightly weirdly?
Very possibly hence my comment to mike not to read too much into just how it was worded
I doubt he would hold his car on the rev limiter
Chassis Dyno?
They were at brunters
On the brakes, or held upto that rpm and worded slightly weirdly?
Very possibly hence my comment to mike not to read too much into just how it was worded
he will either tell the whole story or won't, not much point us guessing
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
#25
Wahay!! I've lost my Virginity!!
Join Date: Oct 2007
Location: prestwick
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Chip-3Door
Originally Posted by Mike Rainbird
Originally Posted by BadAss Focus
Originally Posted by Mike Rainbird
By quick gear ratio calcs, Martin should have just achieved his aim
. Obviously if he wanted them published, he would have said, so you'll have to work it out yourself
.
Well done Martin, was a long time coming
.
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well done Martin, was a long time coming
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
you implying that it held this in top gear?
I suspect you have read a little too much into the wording though mike.
Either way, with that sort of boost at that sort of RPM its going to be QUICK by any standards
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
don't think it would make that boost on rpm limiter
#27
Wahay!! I've lost my Virginity!!
Join Date: Oct 2007
Location: prestwick
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by foreigneRS
Originally Posted by Chip-3Door
Originally Posted by Mike Rainbird
Originally Posted by BadAss Focus
Originally Posted by Mike Rainbird
By quick gear ratio calcs, Martin should have just achieved his aim
. Obviously if he wanted them published, he would have said, so you'll have to work it out yourself
.
Well done Martin, was a long time coming
.
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well done Martin, was a long time coming
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
you implying that it held this in top gear?
I suspect you have read a little too much into the wording though mike.
Either way, with that sort of boost at that sort of RPM its going to be QUICK by any standards
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
don't make assumptions is the key here, i suspect
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
#29
Testing the future
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Chip-3Door
Originally Posted by foreigneRS
he will either tell the whole story or won't, not much point us guessing ![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#30
*** Sierra RS Custard ***
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by foreigneRS
Originally Posted by Chip-3Door
Originally Posted by foreigneRS
he will either tell the whole story or won't, not much point us guessing ![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Indeed, it will do what it can at some point, and sometime after Martin will tell us about it if he wants to.
Im "interested" but not "bothered" as its not something I could ever afford/justify to do myself so I wont ever be competing with Martin or following in his footsteps personally.
I think its fantastic though that Martin is pushing the YB boundaries, along with the MAD camp and some of the foreign lads, it can only be good for the scene as a whole
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#31
Caraholic
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by martin-reyland
Originally Posted by Mike Rainbird
Originally Posted by BadAss Focus
Originally Posted by Mike Rainbird
By quick gear ratio calcs, Martin should have just achieved his aim
. Obviously if he wanted them published, he would have said, so you'll have to work it out yourself
.
Well done Martin, was a long time coming
.
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Well done Martin, was a long time coming
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
you implying that it held this in top gear?
![007](https://passionford.com/forum/images/smilies/bond.gif)
![Raz](https://passionford.com/forum/images/smilies/tongue.gif)
![007](https://passionford.com/forum/images/smilies/bond.gif)
Well done for getting to 8200 in first gear, I'm sure if that was all you did that the MAD lot will see that as a HUGE achievement and come along and congratulate you for hitting 65mph, as that would REALLY have been pushing your block to it's absolute limit and would be a real test of it's capabilities
![Raz](https://passionford.com/forum/images/smilies/tongue.gif)
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#33
![Default](https://passionford.com/forum/images/icons/icon1.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
well done martin glad to see she's producing the goods we all thought she would
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
how much more development and r+d have you got to do on her till you are 100 per cent happy?
#34
Not welcome...
![](https://passionford.com/forum/images/pf_gold_member.png)
Join Date: Dec 2006
Location: South east...
Posts: 3,031
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bullett
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
well done martin glad to see she's producing the goods we all thought she would
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
how much more development and r+d have you got to do on her till you are 100 per cent happy?
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
Well done Martin
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#35
Caraholic
iTrader: (3)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Ben,
The full report will be in the magazine
. Obviously Martin couldn't help himself and was justifiably proud enough of his achievement to post what he has, as the MAD camp have posted numerous time how they don't think it will take any more than 1.5 bar of boost without letting go
.
The full report will be in the magazine
![Raz](https://passionford.com/forum/images/smilies/tongue.gif)
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
![Surprised](https://passionford.com/forum/images/smilies/shocked.gif)
#36
Guest
Posts: n/a
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Mike Rainbird
Ben,
The full report will be in the magazine
. Obviously Martin couldn't help himself and was justifiably proud enough of his achievement to post what he has, as the MAD camp have posted numerous time how they don't think it will take any more than 1.5 bar of boost without letting go
.
The full report will be in the magazine
![Raz](https://passionford.com/forum/images/smilies/tongue.gif)
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
![Surprised](https://passionford.com/forum/images/smilies/shocked.gif)
#37
PassionFord Post Whore!!
Join Date: May 2003
Location: Sheffield
Posts: 9,156
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
good news Martyn ![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
as soon as everyone here realises this is all just internet shit, and words on a screen and cant hurt you etc, the more pleasant life will become
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
as soon as everyone here realises this is all just internet shit, and words on a screen and cant hurt you etc, the more pleasant life will become
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#40
Football Cwazy
Join Date: Oct 2004
Location: Redditch, Worcestershire
Posts: 9,553
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by SapphyMike
good news Martyn ![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
as soon as everyone here realises this is all just internet shit, and words on a screen and cant hurt you etc, the more pleasant life will become![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
as soon as everyone here realises this is all just internet shit, and words on a screen and cant hurt you etc, the more pleasant life will become
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/shocked.gif)
![Surprised](https://passionford.com/forum/images/smilies/shocked.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)