whats the best set of cams to use in a cosworth running a t4
#41
PassionFord Post Whore!!
iTrader: (3)
Join Date: Jul 2003
Location: Edinburgh
Posts: 6,150
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mike Rainbird
Abid,
People have told you, but you have then found that the ones that you have used give BETTER results on your particular engine . I had standard exhaust in my old Sapphire, at 2.2 bar it made 515.4bhp on the dyno and REGULARLY did 180+mph.
People have told you, but you have then found that the ones that you have used give BETTER results on your particular engine . I had standard exhaust in my old Sapphire, at 2.2 bar it made 515.4bhp on the dyno and REGULARLY did 180+mph.
#44
Caraholic
iTrader: (3)
What do you expect - how can I tell you, when you have not given me any inlet or exhaust port sizes to work with etc ?
There is no generic magical cam that gives an improvement everywhere - cam choice is all down to head flow and what will work for one set up, won't another .
There is no generic magical cam that gives an improvement everywhere - cam choice is all down to head flow and what will work for one set up, won't another .
#45
PassionFord Post Whore!!
iTrader: (3)
Join Date: Jul 2003
Location: Edinburgh
Posts: 6,150
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by peteh
Originally Posted by Mike Rainbird
Abid,
People have told you, but you have then found that the ones that you have used give BETTER results on your particular engine . I had standard exhaust in my old Sapphire, at 2.2 bar it made 515.4bhp on the dyno and REGULARLY did 180+mph.
People have told you, but you have then found that the ones that you have used give BETTER results on your particular engine . I had standard exhaust in my old Sapphire, at 2.2 bar it made 515.4bhp on the dyno and REGULARLY did 180+mph.
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM
Zoggon
Ford Sierra/Sapphire/RS500 Cosworth
5
10-08-2015 10:39 AM