Jim Galbally

silicone hose that goes between throttle body and MAF sensor...

its a 79mm-85mm hose and its about 3 inches long...

how much u recon that's worth?

my mate just bought one for about £5.50 from demon tweeks...

how much you recon another company's quoted me? just GUESS

zvhturbo

Considering how large the Dia is about £20 sounds right for a decent bit of hose

Jim Galbally

ps the hose ive been quoted for doesnt actually fit and needs a sleeve under one end

Spiky

iTrader: (1)

45

Jim Galbally

spiky, higher

Oranoco

Would this be the company you were telling me about on Saturday Jim.

170mph out of the 24v unit with just a chip

Spiky

iTrader: (1)

57

Max

I'll go for £70

St3V3_C

you are kidding! Who is it Jim?

JohnnyB

Go and get it Jim from TD then Jim

JohnnyB

Ooops DT's

Jim Galbally

johnny, i will... lol

the price was £85 (however this includes vat and delivery )

Spiky

iTrader: (1)

Smit

iTrader: (5)

bit steep

JohnnyB

I agree steep but the one from demon is only one size on each end


You could try a princh it with the clamp on the small side

Jim Galbally

johnny, thats for a reducer pipe that has the perfect size on both ends. just so happens its almost the perfect length too (about 1cm too short, but then it doesnt matter as you merely move everything over by 1cm... lol its not bolted to anything.)

SFS quoted me £18 for the same hose, but in a 1metre length so i could cut it down to the perfect size...

boost mad

iTrader: (8)

u treid ringing burton power?

Fil

that bit of pipe on mine is 83mm diameter, stretched over one end and loose over the other but when tightened up it aint pinched!

It fits real well

Jim Galbally

fil, you finished the nitrous install yet?

Fil

nope still waiting for a tps switch and some pipe!

Jim Galbally

you actually ordered it yet! lol

my stuff was dispatched next day from highpower by the way

Fil

ordered monday last week i think

Jim Galbally

check with them that its been dispatched then mate...

when mine was delivered (special delivery) and i wasn't in, i didnt get a card thru the door from the postman! i had to reing highpower, they checked with postoffice, and they found out it was sitting in the local postoffice waiting for collection! i wouldnt have known if i hadnt rung highpower to check!

Jim Galbally

just had a call from said company, aparently he got the wrong end of the stick... that 85quid was a quote for a 2foot length of said hose (altho i can understand why i'd want 2ft of it, of how you cah get a 2ft long reducer ) and he'll be getting back to me with a price for what i actually want (well, wanted urgently 2 1/2 weeks ago ) tomorrow

Fil

lol drill a big hole in your wing and poke the airfilter outside using the 2ft pipe

Jim Galbally

its a sierra phil... not a saxo

Fil

I got the bits dilevered but went to my mums, doh! she forgot about it, going to fit it all on now!

Jim Galbally

nice one mate

give us a bell if you get stuck with the wiring... mine was a right pain in the arse

also you might wanna email that TFS guy and ask him about setting it up and bottle refils... could even pop down with me on sunday (gravesend) if you wanna check out the setup etc. etc. and how cool it feels on "proper" jets :P

IIRC he's 3.80 per lb (which aparently is cheap)

also he sets cars up for the price of parts (he'll know what jets to use after he does mine anyway)

Fil

what sort of time you looking at going sunday? Are you booked in?

may do as i do need a refill!

And would like the jets set up

Less.

Yah nitrous and Jim

Wjhat a bad mix

Jim take me for spin and let me drive yer beats I will kill it for yer