Injector help

Reply Subscribe

Thread Tools

Search this Thread

Nov 27, 2006 | 12:15 PM

Dicko&Vacant

Thread Starter

10K+ Poster!!

iTrader: (3)

Joined: Jun 2003

Posts: 10,956

Likes: 0

From: Hartlepool

Injector help

just started the car up and for some reason theres petrol pissing outta the 1st injector where it goes into the fuel rail, will this just be the rubber o ring or could it be anything else?

btw its a 2wd Saff

Nov 27, 2006 | 12:16 PM

SapphyMike

PassionFord Post Whore!!

Joined: May 2003

Posts: 9,156

Likes: 0

From: Sheffield

probably the o-ring if the rail hasnt split or come away from the plenum.

Nov 27, 2006 | 12:22 PM

Dicko&Vacant

Thread Starter

10K+ Poster!!

iTrader: (3)

Joined: Jun 2003

Posts: 10,956

Likes: 0

From: Hartlepool

just had another check and its not where it goes into the fuel rail its where it goes into the inlet manifold itself

so prob still the same? the o ring?

Nov 27, 2006 | 12:27 PM

James_RScos

Advanced PassionFord User

Joined: May 2004

Posts: 1,621

Likes: 0

From: Nottingham

Have you tryed removing it and reseating the oring and injector you can check the oring at the same time for faults

Nov 27, 2006 | 12:29 PM

Dicko&Vacant

Thread Starter

10K+ Poster!!

iTrader: (3)

Joined: Jun 2003

Posts: 10,956

Likes: 0

From: Hartlepool

will check that later, aint got time to remove it yet and have a good look

Nov 27, 2006 | 12:35 PM

SapphyMike

PassionFord Post Whore!!

Joined: May 2003

Posts: 9,156

Likes: 0

From: Sheffield

more than likely o-ring..

Nov 27, 2006 | 02:17 PM

Alps Pacino

PassionFord Post Whore!!

Joined: May 2004

Posts: 8,968

Likes: 2

From: Smogsville

I might be able to get you an o ring if you tell me the size

Trending Topics

Passionford forum 2025

11

1.3k

Nov 27, 2006 | 05:14 PM

lawnsy

PassionFord Post Troll

iTrader: (1)

Joined: Sep 2005

Posts: 2,776

Likes: 0

From: Northeast

think iv'e got a spare rubber down garage on set of yellows check the 10mm bolts that hold the fuel rail to the inlet and make sure one not come out or come lose and not keeping the injectors clamped in .....