FOCUS RS WHEELS.
23-06-2006, 08:11 PM
#1
PassionFord Post Troll
Thread Starter
FOCUS RS WHEELS.
Does anyone know the excact size of the FOCUS RS OZ WHEEL,including offset.Would they fit my series 2 ESCORT RS TURBO?Or am i dreaming?
Have fitted the FOCUS RS BREMBO to it and my shitty 17,s don,t fit over the callipers.
Have fitted the FOCUS RS BREMBO to it and my shitty 17,s don,t fit over the callipers.
23-06-2006, 08:16 PM
#2
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
18's don't really go too well on Mk3 and 4's mate 
I used to have 18's on my old Mk4 XR3i but i'm sure some 16's wou;d have been alot better! lol
Think the Focus rims are 8'' wide too which wont help 
I used to have 18's on my old Mk4 XR3i but i'm sure some 16's wou;d have been alot better! lol
Think the Focus rims are 8'' wide too which wont help
23-06-2006, 08:26 PM
#3
I've found that life I needed.. It's HERE!!
Join Date: Apr 2004
Location: Corby, the land that time forgot.....
Posts: 1,066
Likes: 0
Received 0 Likes
on
0 Posts
Had them on my saff, but had to have spacers fitted. Give Brom of zoo motorsport a bell, he sorted my saff out so he maybe able to help 
Trending Topics
23-06-2006, 09:12 PM
#10
PassionFord Post Whore!!
Originally Posted by costina
I'm after some of those wheels how much do they go for with tyres?
24-06-2006, 09:30 AM
#11
PassionFord Post Troll
Thread Starter
Originally Posted by GTechR
Off topic slightly mate... but who made your caliper brackets?
Got them from ZOO MOTORSPORT..Ł100.
Am now going for COMPOMOTIVE MO,S as i would have no chance fitting the FOCUS RS wheels on with that offset
24-06-2006, 11:13 AM
#12
After havin a chat with stu at MSD, Wish i was back in engineering again due to the amount of over inflated prices of machined components
I myself even have to use a local firm as i don't have access to machines anymore
ITS A RIP OFF
anyway good luck with your project
I myself even have to use a local firm as i don't have access to machines anymore
ITS A RIP OFF
anyway good luck with your project
24-06-2006, 12:33 PM
#16
10K+ Poster!!
iTrader: (3)
Join Date: Jun 2003
Location: Hartlepool
Posts: 10,956
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Coldo
Originally Posted by mercury grey minter
Originally Posted by GTechR
Off topic slightly mate... but who made your caliper brackets?
so thatll be Ł98 profit per set then
i cant believe that people will pay Ł100 for something as easy as that
Sarah
24-06-2006, 08:19 PM
#17
PassionFord Post Troll
Thread Starter
Originally Posted by costina
also looks to me there maybe a weak spot too
I had some made up twice as complicated Ł20
I had some made up twice as complicated Ł20
24-06-2006, 08:58 PM
#18
In my opinion its the sharp angle between the two lwr bolt holes at the thinest point
looks like it could crack under excess rotational forces.
if there was a radius there then that would help.
BUT looking at picture i've now noticed i was thinking the caliper was on the rear
which means there OK
looks like it could crack under excess rotational forces.
if there was a radius there then that would help.
BUT looking at picture i've now noticed i was thinking the caliper was on the rear
which means there OK
25-06-2006, 10:23 AM
#20
PassionFord Post Troll
Thread Starter
Think they are steel,BROM did tell me but i forgot.He,s sold alot of these and has been for about a year ,so am pretty sure there o.k.Also brackets made by others are very simlar so think the desgn is spot-on
Thread
Thread Starter
Forum
Replies
Last Post
