Spec'ing up my 400bhp Cossie Lump. Have i missed anything?
#42
PassionFord Post Whore!!
iTrader: (23)
I ran 397/367 with a Standard overbored bottom end, ported head, GrpA H/G, T38 .63, 4X4 inlet & spacer, 70mm intercooler, wasted spark, MSD map, Grey 403's.
Same engine and tuner made over 400 but with 55 Siemens, -34 actuator, Air injector - injectors were maxed out on this setup
Same engine and tuner made over 400 but with 55 Siemens, -34 actuator, Air injector - injectors were maxed out on this setup
#44
I've found that life I needed.. It's HERE!!
I ran 397/367 with a Standard overbored bottom end, ported head, GrpA H/G, T38 .63, 4X4 inlet & spacer, 70mm intercooler, wasted spark, MSD map, Grey 403's.
Same engine and tuner made over 400 but with 55 Siemens, -34 actuator, Air injector - injectors were maxed out on this setup
Same engine and tuner made over 400 but with 55 Siemens, -34 actuator, Air injector - injectors were maxed out on this setup
#45
I've found that life I needed.. It's HERE!!
#49
Too many posts.. I need a life!!
Join Date: Oct 2006
Location: Hampshire
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
A t34 .63 maxxed out will provide a lot of torque but will probably need rebuilding every year.
#50
I've found that life I needed.. It's HERE!!
I have read that the turbo having lag would be a little nicer to my 4x4 gearbox , and if it blows the turbo think I would get a gt30 turbo , so its over kill for what I need
Thread
Thread Starter
Forum
Replies
Last Post