Breaking Zetec Turbo
03-02-2007 | 10:42 AM
#1
Thread Starter
Part of the Furniture
Joined: Jan 2005
Posts: 196
Likes: 0
From: telford shropshire
Breaking Zetec Turbo
2.1 Zetec
Calibra Turbo Pistons
Farndon Steel Rods
Jamsport Spec Cylinder Head
REC Big Valves
HD Valve Springs
Piper Cams
Piper Pulleys
Spark Plug threads machined for RS turbo cossie plugs
All new gaskets and pumps on fresh build only been started Zero miles.
Looking for 3000 gpb for the engine
WRC Inconal exhaust manifold modified by Primary Designs to take a T3 Flange. comes with longer spark plug leads modified coil pack bracket and thermostat housing. 600gbp
Jenvey 45mm bodies with swedish plenum ready to bolt to zetec head. comes with siemens 660cc injectors throttle position sensor and charge air temp sensor, all linkage included. 650gbp
DTA ecu with race quality harness. as new 700Gbp
Stage 2 BC box with quaife atb never been used
700gbp
Pro alloy rad 150gbp
Pro alloy cooler needs the 2 180degree pipes to finish has the fans 180gbp
Gaz fully adjustable coilovers 250 mile from new 300gbp
full set of poly windows from plastics 4 performance with sliders and window rubbers 110gbp
2 cobra evolution seats in blue narrow bodied ones, one has had small repair to the one ear otherwise smart 350 gbp the pair.
2 sparco 4 point harness 3 inch shoulder and strap dated untill 2012 120 the pair.
11 gallon alloy fuel tank 1.5 litre swirl pot sytec pump facet pump mounting bracket and filter 350 the lot.
IMG]http://i8.photobucket.com/albums/a49/zetecturbo111/P8160003.jpg[/IMG]
LM1 and XD16 ait to fuel gauge with data logger never used brand new sensor. 200gbp
PM With oserious offers loads of other little bits and pieces not listed just ask questions.
If the engine does not go then will prob not sell any of it, if someone is interested in buying the complete car as a donor car to take bits from then make an offer
Calibra Turbo Pistons
Farndon Steel Rods
Jamsport Spec Cylinder Head
REC Big Valves
HD Valve Springs
Piper Cams
Piper Pulleys
Spark Plug threads machined for RS turbo cossie plugs
All new gaskets and pumps on fresh build only been started Zero miles.
Looking for 3000 gpb for the engine
WRC Inconal exhaust manifold modified by Primary Designs to take a T3 Flange. comes with longer spark plug leads modified coil pack bracket and thermostat housing. 600gbp
Jenvey 45mm bodies with swedish plenum ready to bolt to zetec head. comes with siemens 660cc injectors throttle position sensor and charge air temp sensor, all linkage included. 650gbp
DTA ecu with race quality harness. as new 700Gbp
Stage 2 BC box with quaife atb never been used
700gbp
Pro alloy rad 150gbp
Pro alloy cooler needs the 2 180degree pipes to finish has the fans 180gbp
Gaz fully adjustable coilovers 250 mile from new 300gbp
full set of poly windows from plastics 4 performance with sliders and window rubbers 110gbp
2 cobra evolution seats in blue narrow bodied ones, one has had small repair to the one ear otherwise smart 350 gbp the pair.
2 sparco 4 point harness 3 inch shoulder and strap dated untill 2012 120 the pair.
11 gallon alloy fuel tank 1.5 litre swirl pot sytec pump facet pump mounting bracket and filter 350 the lot.
IMG]http://i8.photobucket.com/albums/a49/zetecturbo111/P8160003.jpg[/IMG]
LM1 and XD16 ait to fuel gauge with data logger never used brand new sensor. 200gbp
PM With oserious offers loads of other little bits and pieces not listed just ask questions.
If the engine does not go then will prob not sell any of it, if someone is interested in buying the complete car as a donor car to take bits from then make an offer
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post