When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
sorry mate what Year, just yesterday did Focus 2.0 zetec 2006 two screws at top near opening at either end,underneath 2 plastic screws remove a couple of the arch liner screws holding end of bumper inside under inner arch cover is a 10mm bolt one on either side remove the power cables to fog and reversing light pull gently on either end near rear wheal a locating lug which clips in it will come out with a little pressure ease back the bumper, you will now see how the bottom trim is clipped in you will need a small screw driver and a little bit of patience yopu will also need to drill out 2 rivets no biggy Hope this helps
sorry mate what Year, just yesterday did Focus 2.0 zetec 2006 two screws at top near opening at either end,underneath 2 plastic screws remove a couple of the arch liner screws holding end of bumper inside under inner arch cover is a 10mm bolt one on either side remove the power cables to fog and reversing light pull gently on either end near rear wheal a locating lug which clips in it will come out with a little pressure ease back the bumper, you will now see how the bottom trim is clipped in you will need a small screw driver and a little bit of patience yopu will also need to drill out 2 rivets no biggy Hope this helps
Cheers
sorry should of sed what year 1999 on wards to bowt 2004 cheers
100% certain bumper does not split into two on a mk1 focus mate!!
Iam also 100% it won't split sorry confusion on the year my appologies,
for what it's worth my son's which we colour coded (red) with St rear spoiler looks sweet