hi im after fitting a new crankshaft oil seal to the 1.6 zetec se engine.has anyone ever done one?or no the timing marks.has anyone ever fitted a new timing belt and can share there experiences.

 

You will need a timing kit.Consists of crankshaft pin and camshaft locking bar as there is no woodruff key on the crank and no timing marks.
You need to insert a pin into the bottom of the block and turn the engine until the crakshaft hits the pin,then lock the cams off with a bar,then you have got tdc.

 

as my man said but watch it as the crank and cams have no woodruff keys so need to make sure pulleys tight b4 turning over

 

thanks for ur help