johnenright150rst

A cossy t3 to and erst?
My turbo is knackard and my brother upgraded
his turbo to a t34 so can I use his old t3 as it's
only a few months old when it was taken
off.
I know I'll have to change the exaust housings as
the exaust bolts diffrently.
I also realise that the other bits and bobs will need
to be changed( water oil pipes)
just wanted a heads up before I take a
perfectly good turbo apart.
Cheers John

wayne dowling

iTrader: (1)

Yes m8 you can all you need to do is swap the pipes & exauhs housing
wayne

johnenright150rst

Cheers fella just wanted to double check
before I pull it apart!

johnenright150rst

Also are their any benifits? Or, is the cossy t3 the same as the erst?
Cheers John

Rob_DOHC

iTrader: (4)

What cossy is it 2wd or 4wd? either way yes, effectively a stage 2 if its a 2wd i believe.

Rob,

johnenright150rst

Cheers rob it came off a 2wd

Rob_DOHC

iTrader: (4)

I will probably be corrected, but i think this is more or less a stage 2 t3 (by most rst standards) with out a 360 deg thrust??? but any how capable of over 230ish brake.

Rob,

10th_racer

got a turbo technics stage 2 cossie t3 on mine with a new downpipe to suite it and i find it very good.