Shep_Cobain

Where can i find them guys?

Thanks,

Shep.

Karlos G

iTrader: (4)

Ebay mate.

studabear

I presume you need them for rear disc conversion?

oddkidd creations come with countersunk bolts so no grinding boltheads away to clear the hub

Shep_Cobain

no its the front brakes. Cant find anything on eBay. The guy who was fitting them for me said there to big to just fit straight on. He said i need an adaptor plate like what you need when you fit the mondeo discs on.

rstdave

iTrader: (3)

You don't need them for the front if you fit 4x4 calipers/2wd discs. A washer is all that's required to space the caliper out slightly.

Shep_Cobain

what size washer?

studabear

on the front common conversion is cossie 4x4 calipers and 2wd discs, mine just needed a bit of filing to the caliper carriers, some people use a washer to space the disc centrally (mine didn't need this)

Shep_Cobain

yeh i have 4x4 calipers and sure there 2wd discs. The guy i put them off just said i need 4 x 1mm washers to fit them to the RST.

studabear

thats 1 washer per bolt, sounds correct, but as I said, when I done mine no washers were needed

xrmalin

Have a look at the sticky at the top of the page mate tells you everything you need to know

mark.

rstdave

iTrader: (3)

As you were told by the guy who sold em to you, 4x1mm penny washers is all that's required to space the disc out. Worked perfect on mine.