s1cab

iTrader: (1)

whats a good one for an rst 1600 to make good power between 270-300bhp? ive heard the 280 degree one is good just wondered what people think.
thanks

jamieRST

depends on the rest of the spec of your car m8 when you choose your cam

s1cab

iTrader: (1)

as above ^^ 270-300 it will be.

jamieRST

very helpful,sorry i meant like what turbo,amount of boost,pistons,con rods,head have you got/or planning to get.
when do u get boost,is it late,do you want cam to kick in early at 1500 or late at 2500,push up till 6k or 7k.aswel whats the car used for,daily driver or just foot to the floor sessions once in a while.

IMO you have to take all this into account when choosing your cam profile etc

s1cab

iTrader: (1)

h-section farndon steel rods
wosner forged pistons
big valve head
ported
t3 with t34 compressor wheel running 28psi-30psi.
i get it out for 2/3 months (2000miles) at the most a year

jamieRST

here you go choose one for yourself

http://www.newman-cams.com/pdf/camshaftselection.pdf

if it was me id be going for the phase 2.

hope this helps