For those interested in MegaSquirt EFI...
#81
I've found that life I needed.. It's HERE!!
iTrader: (3)
Join Date: Jun 2008
Location: north wales
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
hay there ive just fitted a m/s v3 to mine and i had problems with it overfueling at the mo ive had to put smaller injectors back in adn i got rid of my idle valve and runs sweet now,but now im in the process of trying to get my bhp to around 400 mark so need to sort out with the bigger injectors
going to be a mission i bet
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
#83
![Default](https://passionford.com/forum/images/icons/icon1.gif)
hay there ive just fitted a m/s v3 to mine and i had problems with it overfueling at the mo ive had to put smaller injectors back in adn i got rid of my idle valve and runs sweet now,but now im in the process of trying to get my bhp to around 400 mark so need to sort out with the bigger injectors
going to be a mission i bet
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
If it's overfuelling check your required fuel is correct and then adjust your map as needed.
I run 480cc injectors and have no trouble getting it to idle (common prob with larger injectors so I hear), or fuel correctly.
Whats your spec for a target of 400bhp?
#86
I'm Finding My Feet Here Now
Join Date: Jul 2009
Location: portsmouth
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i meant what was the obreviation
thanks for that was confusing me a bit
be good to see it i was thinking about doing it to my xr2t but think 226 bhp is enough good little toy thinking of doing bigger things with a 3dr instead
what intercooler you running out of interest i was told by PE years ago to go for a charge cooler as they handle the pressure better so i did and running 1.3 bar happily i did have an ammal valve problem for a while and was running 1.7bar! that was good fun lol
Tony
pics would be good mate
thanks for that was confusing me a bit
be good to see it i was thinking about doing it to my xr2t but think 226 bhp is enough good little toy thinking of doing bigger things with a 3dr instead
what intercooler you running out of interest i was told by PE years ago to go for a charge cooler as they handle the pressure better so i did and running 1.3 bar happily i did have an ammal valve problem for a while and was running 1.7bar! that was good fun lol
Tony
pics would be good mate
#87
Bodger of Blackburn
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i meant what was the obreviation
thanks for that was confusing me a bit
be good to see it i was thinking about doing it to my xr2t but think 226 bhp is enough good little toy thinking of doing bigger things with a 3dr instead
what intercooler you running out of interest i was told by PE years ago to go for a charge cooler as they handle the pressure better so i did and running 1.3 bar happily i did have an ammal valve problem for a while and was running 1.7bar! that was good fun lol
Tony
pics would be good mate
thanks for that was confusing me a bit
be good to see it i was thinking about doing it to my xr2t but think 226 bhp is enough good little toy thinking of doing bigger things with a 3dr instead
what intercooler you running out of interest i was told by PE years ago to go for a charge cooler as they handle the pressure better so i did and running 1.3 bar happily i did have an ammal valve problem for a while and was running 1.7bar! that was good fun lol
Tony
pics would be good mate
the thing about injectors is that bigger ones are worse for idling, but the type makes a big difference, disc ones are better for big power up the revs, but pintle ones mist better so are better low down the revs.
i have a rubbish idle from 850-900 fluctuates up and down, not the worst i've seen though, there is supposed to be a mod to the throttle butterfly that ford did as a recall on the efi setups due to hunting on the idle.
yes charge coolers are better as the boost pipes are shorter and therefore less lag, although you have to fit a pump and extra coolant hoses and a rad for the system
instead.
#88
![Default](https://passionford.com/forum/images/icons/icon1.gif)
lol! Got ya! ![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
I'm running a Radtec full front mount IC.
xr2wishy what size injectors are you running? My 480cc VXR injectors will fuel for over 300bhp easily and I have a really nice stable idle.
EDIT: VXR injectors will only fuel for around 230bhp!
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
I'm running a Radtec full front mount IC.
xr2wishy what size injectors are you running? My 480cc VXR injectors will fuel for over 300bhp easily and I have a really nice stable idle.
EDIT: VXR injectors will only fuel for around 230bhp!
Last edited by Karlos G; 23-11-2010 at 08:41 AM.
#89
Bodger of Blackburn
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
my idle isn't terrible and the map needs ironing out a little to make it better.
do you have a hole in the middle of your throttle butterfly?
should only be a couple off mm.
also my idle valve is noisey as, just the efi remote mount one, i'm guessing it could be faulty or a bad earth feeding back a little.
#90
PassionFord Post Troll
Join Date: Jun 2003
Location: Finland
Posts: 2,866
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
A noisy idle valve usually means that it's driven with too low a frequency.
To get a better idle and fuel economy with big injectors, you can always try uploading the new sequential firmware, if you already have a MS-II. Needs a small additional PCB for it that goes for 18$ + components.
To get a better idle and fuel economy with big injectors, you can always try uploading the new sequential firmware, if you already have a MS-II. Needs a small additional PCB for it that goes for 18$ + components.
#91
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i'm using 440cc ones, disc type where the disc is further up the injector than pintle ones, makes then faster responding to fuel pressure changes.
my idle isn't terrible and the map needs ironing out a little to make it better.
do you have a hole in the middle of your throttle butterfly?
should only be a couple off mm.
also my idle valve is noisey as, just the efi remote mount one, i'm guessing it could be faulty or a bad earth feeding back a little.
my idle isn't terrible and the map needs ironing out a little to make it better.
do you have a hole in the middle of your throttle butterfly?
should only be a couple off mm.
also my idle valve is noisey as, just the efi remote mount one, i'm guessing it could be faulty or a bad earth feeding back a little.
I cant say I noticed a hole in the butterfly but i'm not 100% sure?!
#92
I'm Finding My Feet Here Now
Join Date: Jul 2009
Location: portsmouth
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
yeah what he said lol
my trouble is i`ve been out the game so long i have`nt got a clue what most of you are talking about most of the time
im keeping the xr forever so you never know i might come back to it in later years
Tony
my trouble is i`ve been out the game so long i have`nt got a clue what most of you are talking about most of the time
im keeping the xr forever so you never know i might come back to it in later years
Tony
#93
Bodger of Blackburn
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
A noisy idle valve usually means that it's driven with too low a frequency.
To get a better idle and fuel economy with big injectors, you can always try uploading the new sequential firmware, if you already have a MS-II. Needs a small additional PCB for it that goes for 18$ + components.
To get a better idle and fuel economy with big injectors, you can always try uploading the new sequential firmware, if you already have a MS-II. Needs a small additional PCB for it that goes for 18$ + components.
#97
I'm Finding My Feet Here Now
Join Date: Jul 2009
Location: portsmouth
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
some very nice work there guys
that EFI inlet repulses me for some reason nice to see your erst charge carrier though karlos
and xr2wishy that exhaust pipe looks almost factory
what mastercylinder/reseviour you got on there?
be interested in what performance increases you get from the mod alone
also how much clearence have you got between your rad and actuator mate i need to increase the gap on mine
shes currentley in the body shop having some rear end work done ready for national day then im going to strip and rebuild with a few minor mods
Tony
cheers for the piccies guys
that EFI inlet repulses me for some reason nice to see your erst charge carrier though karlos
and xr2wishy that exhaust pipe looks almost factory
what mastercylinder/reseviour you got on there?
be interested in what performance increases you get from the mod alone
also how much clearence have you got between your rad and actuator mate i need to increase the gap on mine
shes currentley in the body shop having some rear end work done ready for national day then im going to strip and rebuild with a few minor mods
Tony
cheers for the piccies guys
#99
Bodger of Blackburn
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
some very nice work there guys
that EFI inlet repulses me for some reason nice to see your erst charge carrier though karlos
and xr2wishy that exhaust pipe looks almost factory
what mastercylinder/reseviour you got on there?
be interested in what performance increases you get from the mod alone
also how much clearence have you got between your rad and actuator mate i need to increase the gap on mine
shes currentley in the body shop having some rear end work done ready for national day then im going to strip and rebuild with a few minor mods
Tony
cheers for the piccies guys
that EFI inlet repulses me for some reason nice to see your erst charge carrier though karlos
and xr2wishy that exhaust pipe looks almost factory
what mastercylinder/reseviour you got on there?
be interested in what performance increases you get from the mod alone
also how much clearence have you got between your rad and actuator mate i need to increase the gap on mine
shes currentley in the body shop having some rear end work done ready for national day then im going to strip and rebuild with a few minor mods
Tony
cheers for the piccies guys
mondeo servo/master cylinder with modded xr2 servo brackets.
clearance between rad and turbo is about 15mm for now, using a 0.48 cossie housing, on a 0.36 erst housing i had about an inch of clearance, i moved the rad into the channel at the front and made lower brackets on crossmember and made new mounts welded to top of rad to bolt to slam panel.
also had to make a one off actuator bracket too, as the cossie one needs to be totally different to the erst one otherwise it'll eat the rad.
act meter is one from R&B motorsport cost about Ł50 delivered IIRC.
i only did the exhaust pipe bit as i had it sat around and needed to mock something up, but worked so well i decided to weld the take offs onto it for the ISCV and 1/8bsp for the act meter.
link to my build: http://xrtwo.speedcentral.co.uk/viewtopic.php?t=41968
Last edited by xr2wishy; 10-08-2009 at 07:52 PM.
#101
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
if you're not using the mfi air temp sensor then you can use that to feed an idle valve. Unscrew the sensor and fit a pipe fitting removed from the back of a standard manifold. The water pipe fitting from the back of the manifold screws straight in.
#110
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Waiting for my new trigger wheel to be fitted and balanced to my spare pulley.
Then mapping can continue![](https://passionford.com/forum/images/smilies/roi.gif)
Shit sorry have not done it yet mate!
Although There is a photo of the trigger wheel fitted to my pulley, and the CPS bracket at the start of this thread, other than that it's just one of these CPS's...
Then mapping can continue
![](https://passionford.com/forum/images/smilies/roi.gif)
Shit sorry have not done it yet mate!
Although There is a photo of the trigger wheel fitted to my pulley, and the CPS bracket at the start of this thread, other than that it's just one of these CPS's...
![](http://img197.imageshack.us/img197/3893/vrsensor.jpg)
#111
Bodger of Blackburn
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
bit of help here chaps planning to use megasquirt, forget the diode trick, i tired and it was all over the place, perhaps the zener diode wasn't perfect, but in the end i just altered the rev counter in the clocks.
what you need to do is feed the rev counter off one side of the coil and then open up the dials and there is an adjustment screw under the rev counter unit, just watch megatune and hold 3k rpm and adjust the potentiometer so the rev counter reads the same.
hey presto, job done, i did this on my xr2, but should work the same on an escort or any ford dial from similar period in time.
what you need to do is feed the rev counter off one side of the coil and then open up the dials and there is an adjustment screw under the rev counter unit, just watch megatune and hold 3k rpm and adjust the potentiometer so the rev counter reads the same.
hey presto, job done, i did this on my xr2, but should work the same on an escort or any ford dial from similar period in time.
#114
PassionFord Post Troll
Join Date: Jun 2003
Location: Finland
Posts: 2,866
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
If I remember correctly, most Ford clocks dont allow enough detuning to make it read right. All have the adjustment screw though.
Another trick that always works is to set an output pin from the MS as tach out. Then connect it to drive a small inductor (e.g. coil from a relay). Then couple this signal to the tacho.
Another trick that always works is to set an output pin from the MS as tach out. Then connect it to drive a small inductor (e.g. coil from a relay). Then couple this signal to the tacho.
#115
Bodger of Blackburn
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
If I remember correctly, most Ford clocks dont allow enough detuning to make it read right. All have the adjustment screw though.
Another trick that always works is to set an output pin from the MS as tach out. Then connect it to drive a small inductor (e.g. coil from a relay). Then couple this signal to the tacho.
Another trick that always works is to set an output pin from the MS as tach out. Then connect it to drive a small inductor (e.g. coil from a relay). Then couple this signal to the tacho.
#116
I've found that life I needed.. It's HERE!!
Join Date: Aug 2006
Location: The Netherlands
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I'm planning on building a CVH EFI for my track toy
I allready got a CVH EFI and bought a inlet of a fiesta, but i still need the wiring can i buy it from a normal CVH EFI or am i missing to much then?
I know i need other pistons, because std EFI pistons are diff. Atleast that's what they told me. Have to find out when i take the engine apart
Also i would like to run iginition cut, so i can't run a EDIS system. Do you need crankposition signal and campositionsignal or is crankposition enough? Because that's allready on the EFI engine i bought.
I will have to go through all the megasquirt info, because i'm not totally up to date with it!
If i have more questions i will post them here and don't make new threads haha
I allready got a CVH EFI and bought a inlet of a fiesta, but i still need the wiring can i buy it from a normal CVH EFI or am i missing to much then?
I know i need other pistons, because std EFI pistons are diff. Atleast that's what they told me. Have to find out when i take the engine apart
Also i would like to run iginition cut, so i can't run a EDIS system. Do you need crankposition signal and campositionsignal or is crankposition enough? Because that's allready on the EFI engine i bought.
I will have to go through all the megasquirt info, because i'm not totally up to date with it!
If i have more questions i will post them here and don't make new threads haha
#117
![Default](https://passionford.com/forum/images/icons/icon1.gif)
When you buy your MS ECU it will come with a loom so you do not need any of the original EFI loom just some of the connectors, CPS is all you need, also you can lose the EDIS and just use a zetec coil pack instead, much easier! ![](https://passionford.com/forum/images/smilies/smile012.gif)
Everyhthing you need is on page 1 of this thread including diagrams for the inlet manifold multiplug loom, and your coolant and air temp sensor settings!
![](https://passionford.com/forum/images/smilies/smile012.gif)
Everyhthing you need is on page 1 of this thread including diagrams for the inlet manifold multiplug loom, and your coolant and air temp sensor settings!
#118
Bodger of Blackburn
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
pretty much as above, i'd get the as much engine loom from a cvh efi engine as you can, all the bits save time, like the injector rail harness and cps plug and shieled wire.
just join them up to the MS connector/wires from the plug with solder and heatshrink tubing.
pretty easy to do.
just join them up to the MS connector/wires from the plug with solder and heatshrink tubing.
pretty easy to do.