For those interested in MegaSquirt EFI...
#42
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Bought a Wideband Lambda and controller today, just need to knock up some Det Cans and i'll be able to play around with tuning myself! ![](https://passionford.com/forum/images/smilies/roi.gif)
This one:
http://trigger-wheels.com/store/inde...FZkA4wodfyBx_Q
Although I didnt pay that for it
![](https://passionford.com/forum/images/smilies/roi.gif)
This one:
http://trigger-wheels.com/store/inde...FZkA4wodfyBx_Q
Although I didnt pay that for it
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Last edited by Karlos G; 23-07-2009 at 04:53 PM.
#51
Too many posts.. I need a life!!
Join Date: May 2004
Location: Mikkeli, Finland
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
#53
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I am mate! Will be properly mapped tomorrow and so should be kicking out something between 210bhp and 230bhp!
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
You wouldnt beleive how much more space is in the engine bay now the metering unit, fuel accumulator, etc... has all gone!
#54
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
just been to the meet at trafford centre, mine doesn't feel quick anymore, at times it does but its needing more oomph, so with this conversion done over the winter it should be a lot better
#55
Too many posts.. I need a life!!
Join Date: May 2004
Location: Mikkeli, Finland
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
![Name: mekaprojekti06062008006.jpg
Views: 1170
Size: 156.3 KB](https://passionford.com/forum/attachments/ford-escort-rs-turbo/121364d1501884623-for-those-interested-in-megasquirt-efi-mekaprojekti06062008006.jpg)
Right place for ke-jet.. recycle bin
#57
Too many posts.. I need a life!!
Join Date: May 2004
Location: Mikkeli, Finland
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
We built it about one week in evenings, all wiring is double protected and harness goes all the time in protective pipe. All connecting points are soldered and we use that.. hmm i dont know english word, anyway that black tube which shrinks when warmed. I have main relays nicely available in firewall and fuses in order too. Manifold itself does not take long time to install because efi head direct fitment. Wiring when doing properly takes time.
#59
![Default](https://passionford.com/forum/images/icons/icon1.gif)
We built it about one week in evenings, all wiring is double protected and harness goes all the time in protective pipe. All connecting points are soldered and we use that.. hmm i dont know english word, anyway that black tube which shrinks when warmed. I have main relays nicely available in firewall and fuses in order too. Manifold itself does not take long time to install because efi head direct fitment. Wiring when doing properly takes time.
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
OFAB and OFAC cannot be live mapped so your power is limited by what chip you can buy, and all you can adjust is the base fuel pressure!
IMO it's a pointless conversion when you can go Megasquirt, Gotech, Omex, VEMS, etc... which can al be live mapped!
![](https://passionford.com/forum/images/smilies/roi.gif)
#62
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Yes that is mostly how I did mine, the english word for shrinks when heated is 'Heat Shrink' lol ![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
Nope had to use plugs from a old loom although you can buy them new!
OFAB and OFAC cannot be live mapped so your power is limited by what chip you can buy, and all you can adjust is the base fuel pressure!
IMO it's a pointless conversion when you can go Megasquirt, Gotech, Omex, VEMS, etc... which can al be live mapped!![](https://passionford.com/forum/images/smilies/roi.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
Nope had to use plugs from a old loom although you can buy them new!
OFAB and OFAC cannot be live mapped so your power is limited by what chip you can buy, and all you can adjust is the base fuel pressure!
IMO it's a pointless conversion when you can go Megasquirt, Gotech, Omex, VEMS, etc... which can al be live mapped!
![](https://passionford.com/forum/images/smilies/roi.gif)
#66
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Dont know yet! lol ![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
Literally on got it fired up yesterday and then had to go out, today i've been extremely hung over and so havent played with it at all.
Doug (Garage19) is coming over tomorrow night and we are going to map it so I'll let you know how we get on!
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
Literally on got it fired up yesterday and then had to go out, today i've been extremely hung over and so havent played with it at all.
Doug (Garage19) is coming over tomorrow night and we are going to map it so I'll let you know how we get on!
![](https://passionford.com/forum/images/smilies/roi.gif)
#68
Wahay!! I've lost my Virginity!!
iTrader: (1)
Join Date: Jul 2009
Location: estonia
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Done my 1,8zvh conversion with V2,2. Cost me with Innovate Lc-1 kit ~430Ł
However it`s quite hard to get it run properly. I mean not standing and running in your garage, but on the road with 1+ boost without melting down your engine.
My setup:
Xr3 Efi head, ported
FRST inlet manifold
350cc @ 3bar Saab Injectors
Malpassi FPR
Walbro 255l/h fuel pump
Ms V2,2 with EDIS
EFI flywheel 1,8 zetec.
Air temp/Coolant temp sensors- GM (Ms default, no worries with calibrating)
Lc-1 DB-kit.
However it`s quite hard to get it run properly. I mean not standing and running in your garage, but on the road with 1+ boost without melting down your engine.
My setup:
Xr3 Efi head, ported
FRST inlet manifold
350cc @ 3bar Saab Injectors
Malpassi FPR
Walbro 255l/h fuel pump
Ms V2,2 with EDIS
EFI flywheel 1,8 zetec.
Air temp/Coolant temp sensors- GM (Ms default, no worries with calibrating)
Lc-1 DB-kit.
![](http://i6.photobucket.com/albums/y201/bomsch/SDC100312.jpg)
Last edited by bomsch; 27-07-2009 at 07:58 AM.
#70
Too many posts.. I need a life!!
Join Date: May 2004
Location: Mikkeli, Finland
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Done my 1,8zvh conversion with V2,2. Cost me with Innovate Lc-1 kit ~430Ł
However it`s quite hard to get it run properly. I mean not standing and running in your garage, but on the road with 1+ boost without melting down your engine.
My setup:
Xr3 Efi head, ported
FRST inlet manifold
350cc @ 3bar Saab Injectors
Malpassi FPR
Walbro 255l/h fuel pump
Ms V2,2 with EDIS
EFI flywheel 1,8 zetec.
Air temp/Coolant temp sensors- GM (Ms default, no worries with calibrating)
Lc-1 DB-kit.
However it`s quite hard to get it run properly. I mean not standing and running in your garage, but on the road with 1+ boost without melting down your engine.
My setup:
Xr3 Efi head, ported
FRST inlet manifold
350cc @ 3bar Saab Injectors
Malpassi FPR
Walbro 255l/h fuel pump
Ms V2,2 with EDIS
EFI flywheel 1,8 zetec.
Air temp/Coolant temp sensors- GM (Ms default, no worries with calibrating)
Lc-1 DB-kit.
Do gm sensors fit directly to efi inlet manifold?
#71
PassionFord Post Troll
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Done my 1,8zvh conversion with V2,2. Cost me with Innovate Lc-1 kit ~430Ł
However it`s quite hard to get it run properly. I mean not standing and running in your garage, but on the road with 1+ boost without melting down your engine.
My setup:
Xr3 Efi head, ported
FRST inlet manifold
350cc @ 3bar Saab Injectors
Malpassi FPR
Walbro 255l/h fuel pump
Ms V2,2 with EDIS
EFI flywheel 1,8 zetec.
Air temp/Coolant temp sensors- GM (Ms default, no worries with calibrating)
Lc-1 DB-kit.
However it`s quite hard to get it run properly. I mean not standing and running in your garage, but on the road with 1+ boost without melting down your engine.
My setup:
Xr3 Efi head, ported
FRST inlet manifold
350cc @ 3bar Saab Injectors
Malpassi FPR
Walbro 255l/h fuel pump
Ms V2,2 with EDIS
EFI flywheel 1,8 zetec.
Air temp/Coolant temp sensors- GM (Ms default, no worries with calibrating)
Lc-1 DB-kit.
Mapping for 1 bar WOT is the easy bit i if you have the right equipment.
#72
PassionFord Post Troll
#73
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Done my 1,8zvh conversion with V2,2. Cost me with Innovate Lc-1 kit ~430Ł
However it`s quite hard to get it run properly. I mean not standing and running in your garage, but on the road with 1+ boost without melting down your engine.
My setup:
Xr3 Efi head, ported
FRST inlet manifold
350cc @ 3bar Saab Injectors
Malpassi FPR
Walbro 255l/h fuel pump
Ms V2,2 with EDIS
EFI flywheel 1,8 zetec.
Air temp/Coolant temp sensors- GM (Ms default, no worries with calibrating)
Lc-1 DB-kit.
However it`s quite hard to get it run properly. I mean not standing and running in your garage, but on the road with 1+ boost without melting down your engine.
My setup:
Xr3 Efi head, ported
FRST inlet manifold
350cc @ 3bar Saab Injectors
Malpassi FPR
Walbro 255l/h fuel pump
Ms V2,2 with EDIS
EFI flywheel 1,8 zetec.
Air temp/Coolant temp sensors- GM (Ms default, no worries with calibrating)
Lc-1 DB-kit.
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
Unless your on the limit of your injectors or fuel pump?
Will do mate but wont be for a few weeks, it's being mapped on the road so i'll have to book it in somewhere for a power run to see what BHP i'm actually making.
#74
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
p-s i dont run o-fab.
Last edited by crazycage; 27-07-2009 at 09:10 AM.
#75
Wahay!! I've lost my Virginity!!
iTrader: (1)
Join Date: Jul 2009
Location: estonia
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Yep.
My map signal is jumping up and down @ 5000+ rpm.
At least i dont get VR trigger errors (common problem).
For now new LUK clutch kit with uprated coatings slips thru after 0,8bar boost. After fixing this problem i will go to dyno and hope to see around 270hp
My map signal is jumping up and down @ 5000+ rpm.
At least i dont get VR trigger errors (common problem).
For now new LUK clutch kit with uprated coatings slips thru after 0,8bar boost. After fixing this problem i will go to dyno and hope to see around 270hp
Last edited by bomsch; 27-07-2009 at 11:46 AM.
#76
Too many posts.. I need a life!!
iTrader: (1)
Join Date: Nov 2006
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Nice One Karlos ![Top](https://passionford.com/forum/images/smilies/smile011.gif)
You said it would be done in a day, and it was... just a shame that a few weeks got inbetween the day said and the day complete![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Good luck with the set-up and enjoy the new 'chatter'![](https://passionford.com/forum/images/smilies/roi.gif)
Again, just goes to show that if the time and effort is put into doing your homework first, anything is possible! Well done Mate.
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
You said it would be done in a day, and it was... just a shame that a few weeks got inbetween the day said and the day complete
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Good luck with the set-up and enjoy the new 'chatter'
![](https://passionford.com/forum/images/smilies/roi.gif)
Again, just goes to show that if the time and effort is put into doing your homework first, anything is possible! Well done Mate.
#77
Bodger of Blackburn
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i'm running rover 600 injectors on my 1.8zvh on megasquirt II v3.0 with extra code therefore 16*16 tables, getting it to idle nicely is a pain in the arse, as is to not overfuel on throttle.
on part throttle and i mean 2% ish it dies, and i'm using a vems wideband and that doesn't want to communicate with laptop.
tis a fiddly task this efi lark.
on part throttle and i mean 2% ish it dies, and i'm using a vems wideband and that doesn't want to communicate with laptop.
tis a fiddly task this efi lark.
#79
15K+ Super Poster!!
![](https://passionford.com/forum/images/pf_gold_member.png)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i'm running rover 600 injectors on my 1.8zvh on megasquirt II v3.0 with extra code therefore 16*16 tables, getting it to idle nicely is a pain in the arse, as is to not overfuel on throttle.
on part throttle and i mean 2% ish it dies, and i'm using a vems wideband and that doesn't want to communicate with laptop.
tis a fiddly task this efi lark.
on part throttle and i mean 2% ish it dies, and i'm using a vems wideband and that doesn't want to communicate with laptop.
tis a fiddly task this efi lark.
Those are the bits where the skill is. Making power is easy.
#80
Too many posts.. I need a life!!
Join Date: May 2006
Location: thurrock essex
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
nothing like a good blast in your car to shake off a hangover
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)