y4n

My rev counter reads half when joined to the green wire on the efi engine loom plug. so i took the signal wire to pin 11 and the edis unit and it reads nothing at all on my rev counter.

Am i ment to take the signal wire and join pins 10 and 12 on the edis together?

gee1599

yes if i remember correct have you looked at rsbible??

y4n

Hello thanks for the info. i looked on rsbible and it says take the wire to pin 11 on the edis unit and i have done this and it doesnt work. it also doesnt say anything about joining pin 10 and 12 together. im stuck


yan

gee1599

you join them together so you have twice as much feed going to the rev counter

SafeChav

And if you want to fuck the spark up aswell...............

y4n

OK im really stuck now. what do i have to do?

SafeChav

It should work off pin 11..........have you PROPERLY put a pin into the plug for pin 11, or are you just trying to bodge it in?

y4n

I swear you can read minds lol, yeah im just trying to bodge it to make it work before i finalize the wiring for rev counter. Im still using the mfi clocks cos on rsbible it says it dont need changing

SafeChav

DO IT PROPERLY...............i would almost guarantee this is your problem.