fiesta project mk1 GEARBOX
#1
Virgin
Thread Starter
fiesta project mk1 GEARBOX
Hey everyone, newbie here!
Ive just aquired a MK1 Fez and need to know whats the best option for fitting a 2.0 box with regards to availabilty of conversion kit shafts hubs etc, I was thinking early mondeo 2.0 zetec (silvertop)
Thoughts please??
Thanks lol
Ive just aquired a MK1 Fez and need to know whats the best option for fitting a 2.0 box with regards to availabilty of conversion kit shafts hubs etc, I was thinking early mondeo 2.0 zetec (silvertop)
Thoughts please??
Thanks lol
Last edited by r0ckst34dy; 24-06-2011 at 03:24 PM.
#7
Virgin
Thread Starter
Ahh, Right, well what smaller box can I fit which has a well caterered for conversion kit and yeah im going around 300bhp with a turbo lump.
Trending Topics
#8
PassionFord Post Whore!!
iTrader: (2)
Uprated BC box/IB5 is a lot less hassle but still need to do some chopping to the inner wings.
Fiesta centre do a five-speed conversion kit which comes with the plate to box to the inner wing you have to cut and a new tie bar which clears the box. You still need an Mk1 XR2 or Mk1 1300 smaller driveshaft and gearbox carrier. Not the hardest conversion but it isn't simple and does need some welding/fabrication.
Fiesta centre do a five-speed conversion kit which comes with the plate to box to the inner wing you have to cut and a new tie bar which clears the box. You still need an Mk1 XR2 or Mk1 1300 smaller driveshaft and gearbox carrier. Not the hardest conversion but it isn't simple and does need some welding/fabrication.
Thread
Thread Starter
Forum
Replies
Last Post