zetec turbo alternator set up in a S1
#1
PassionFord Regular
Thread Starter
zetec turbo alternator set up in a S1
Hi guys im after a little bit of advice. Im currently fitting a silvertop zetec turbo into my S1 and am slightly stuck when it comes to the alternator setup. I just tried fitting a fiesta xr2 alternator bracket and a s2 70amp alternator, iv seen it fitted to a load of s2 rst's but the alternator is hitting the anti roll bar bracket in mine
Could anyone give me a bit of advice? do i use a different bracket?
This is what iv tried fitting
Thanks rob
Could anyone give me a bit of advice? do i use a different bracket?
This is what iv tried fitting
Thanks rob
#2
PassionFord Post Whore!!
On my mk4 I used a escort rst alternator bracket and a lowering bracket I purchased on ebay, this dropped the alternator and sorted the issue as I first tried using a frst bracket.
If you have a erst bracket bolt it to the engine with the top holes in the bracket bolted to the bottom holes on the block and see if that will be any help? (hope that made sense)
Picture may help a little.
If you have a erst bracket bolt it to the engine with the top holes in the bracket bolted to the bottom holes on the block and see if that will be any help? (hope that made sense)
Picture may help a little.
Last edited by studabear; 16-07-2015 at 07:10 PM.
#3
PassionFord Regular
Thread Starter
On my mk4 I used a escort rst alternator bracket and a lowering bracket I purchased on ebay, this dropped the alternator and sorted the issue as I first tried using a frst bracket.
If you have a erst bracket bolt it to the engine with the top holes in the bracket bolted to the bottom holes on the block and see if that will be any help? (hope that made sense)
Picture may help a little.
If you have a erst bracket bolt it to the engine with the top holes in the bracket bolted to the bottom holes on the block and see if that will be any help? (hope that made sense)
Picture may help a little.
#5
PassionFord Regular
Thread Starter
#6
PassionFord Post Whore!!
zetec turbo alternator set up in a S1
That is a copy of a escort rs turbo bracket, so you want a bracket of a escort rs turbo or a xr3i. You might still need a bracket to make it sit lower.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post