PassionFord - Ford Focus, Escort & RS Forum Discussion
Mk mounts on adjustable bladed arb
Mk mounts on adjustable bladed arb
0 2016/12/27 08:30:48
We are sinking the workshop ramps so they are flush with the garage floor so I had to get the pigs out. Thought I would take a quick pic
We are sinking the workshop ramps so they are flush with the garage floor so I had to get the pigs out. Thought I would take a quick pic
0 2016/12/16 02:54:13
0 2016/12/02 06:38:37
That one
That one
0 2016/12/02 06:33:39
Here is Cossie Dave's I saw this make 700.3 bhp on the Dyno when Mark mapped it, Dave says there is some lag but nothing that dropping a cog doesn't solve to blow away a sports bike.
Here is Cossie Dave's I saw this make 700.3 bhp on the Dyno when Mark mapped it, Dave says there is some lag but nothing that dropping a cog doesn't solve to blow away a sports bike.
0 2016/12/01 08:54:48
Crap pic but you get the idea. the intercooler was not great at that time and I am on a totally standard engine and stud kit (just metal gasket) so Mark held it back a bit. I have since put a Hart inlet on there and a better cooler but not remapped yet.
Crap pic but you get the idea. the intercooler was not great at that time and I am on a totally standard engine and stud kit (just metal gasket) so Mark held it back a bit. I have since put a Hart inlet on there and a better cooler but not remapped yet.
0 2016/11/30 01:51:17
0 2016/11/22 08:24:44
This one is Porsha, her brother is called Cosworth
This one is Porsha, her brother is called Cosworth
0 2016/11/16 01:09:12
0 2016/11/12 08:43:32
0 2016/11/12 08:43:25
0 2016/11/12 08:43:19
0 2016/11/12 08:43:11
0 2016/11/12 08:43:04
Still got wires to tidy but getting there
Still got wires to tidy but getting there
0 2016/11/12 08:42:56
I have started the build up, have ridden it today, it is quite an odd feeling
I have started the build up, have ridden it today, it is quite an odd feeling
0 2016/11/11 08:46:42
0 2016/10/29 12:06:14
0 2016/10/24 06:14:49
Saw this today at jlr where they store their cars, 4.4 v8 . Looks like an over tev
Saw this today at jlr where they store their cars, 4.4 v8 . Looks like an over tev
0 2016/10/24 06:14:10
Pedals to match rear light
Pedals to match rear light
0 2016/10/21 08:45:05
Front brake all done too
Front brake all done too
0 2016/10/21 07:01:59
0 2016/10/21 07:01:50
Pouch shut with battery in there, this should give over 30 miles range on 2 hr charge
Pouch shut with battery in there, this should give over 30 miles range on 2 hr charge
0 2016/10/21 05:29:01
Battery in the Harley leather pouch
Battery in the Harley leather pouch
0 2016/10/21 05:28:56
Wheel n tyre done, I still might do the spokes in black though
Wheel n tyre done, I still might do the spokes in black though
0 2016/10/21 05:28:51
The guy that made the battery also made me an 88.8 volt one for this, it pumps out nearly 10hp and does power wheelies. I have been 40 mph already and not at top speed. 50mile range on 2. Hr charge
The guy that made the battery also made me an 88.8 volt one for this, it pumps out nearly 10hp and does power wheelies. I have been 40 mph already and not at top speed. 50mile range on 2. Hr charge
0 2016/10/14 10:40:27
0 2016/10/14 10:27:31
0 2016/10/14 10:27:19
0 2016/10/14 10:27:10
0 2016/10/14 10:27:03
This was the first successful lace up
This was the first successful lace up
0 2016/10/14 10:26:56
Got a Harley leather pouch off eBay to hold the 52 volt battery which was made up of loads of e cigarette batteries all spot welded together
Got a Harley leather pouch off eBay to hold the 52 volt battery which was made up of loads of e cigarette batteries all spot welded together
0 2016/10/14 10:26:46
0 2016/10/14 10:15:54
0 2016/10/14 10:15:34
Frame had to get a bit wider
Frame had to get a bit wider
0 2016/10/14 10:15:19
The spokes were too wide for the bike hubs so I cut some 2mmstell with a hole saw, bolted them through the spoke holes and then plug welded them on
The spokes were too wide for the bike hubs so I cut some 2mmstell with a hole saw, bolted them through the spoke holes and then plug welded them on
0 2016/10/14 10:15:06
Welds will all be dressed
Welds will all be dressed
0 2016/10/14 10:15:00
Fits in the frame
Fits in the frame
0 2016/10/14 10:14:51
Cut the centre out of a steel wheel and put the tyre on for mocking up purposes. Mark from MK did offer to make me a billet ally wheel but I wanted to keep it ghetto
Cut the centre out of a steel wheel and put the tyre on for mocking up purposes. Mark from MK did offer to make me a billet ally wheel but I wanted to keep it ghetto
0 2016/10/14 10:10:18
Ordered a 240/18 chopper tyre
Ordered a 240/18 chopper tyre
0 2016/10/14 10:10:08
Back of hubs
Back of hubs
0 2016/09/05 10:15:43