PassionFord - Ford Focus, Escort & RS Forum Discussion
0 2017/02/14 09:04:37
Never seen a battery or been out of the house
Never seen a battery or been out of the house
0 2017/02/14 09:04:31
Just for you Markk. Thought I would give it a go
Just for you Markk. Thought I would give it a go
0 2017/02/12 06:37:14
0 2017/02/11 08:12:00
0 2017/02/11 08:11:53
Drive shafts bolted in. Will powder coat them at some stage
Drive shafts bolted in. Will powder coat them at some stage
0 2017/02/11 08:11:46
Here are the centre bearing mounts that I made.
Here are the centre bearing mounts that I made.
0 2017/02/11 08:11:39
0 2017/02/11 01:49:55
Diff hanger is pretty close but there is about 10mm air gap
Diff hanger is pretty close but there is about 10mm air gap
0 2017/02/11 01:49:48
Supra diff mounted directly on the beam
Supra diff mounted directly on the beam
0 2017/02/11 01:49:42
0 2017/02/11 01:49:36
0 2017/02/11 01:49:29
It's in!
It's in!
0 2017/02/11 01:49:23
0 2017/02/04 12:11:19
0 2017/02/04 12:11:05
0 2017/02/04 12:10:44
0 2017/02/04 12:08:42
0 2017/02/04 12:08:01
0 2017/02/04 12:07:43
0 2017/02/04 12:04:07
0 2017/02/04 12:04:05
0 2017/02/04 12:04:02
0 2017/02/04 12:04:00
0 2017/02/04 12:03:57
0 2017/02/04 12:03:24
0 2017/02/04 12:03:24
0 2017/01/29 01:14:27
0 2017/01/28 05:30:59
0 2017/01/14 11:45:36
0 2017/01/10 00:49:58
I did some work on the brakes at the weekend so took another few pics of the hubs and compression struts in place
I did some work on the brakes at the weekend so took another few pics of the hubs and compression struts in place
0 2017/01/10 00:49:46
I asked Mark about the fuel rail and he sent me this to prove it was posted. I am in contact with Mark as I have had a lot of bits recently and am waiting on my beam. We have had frank conversations about this thread and he is very clear that he knows the timescales have been poor but he says he has never ripped anyone off. I am posting this as I know he doesn't know how to and I don't think he wants to get drawn in to this thread.
I asked Mark about the fuel rail and he sent me this to prove it was posted. I am in contact with Mark as I have had a lot of bits recently and am waiting on my beam. We have had frank conversations about this thread and he is very clear that he knows the timescales have been poor but he says he has never ripped anyone off. I am posting this as I know he doesn't know how to and I don't think he wants to get drawn in to this thread.
0 2017/01/07 01:20:06
0 2016/12/28 04:51:21
0 2016/12/28 04:51:12
0 2016/12/28 04:51:01
I need to lower the front a bit
I need to lower the front a bit
0 2016/12/28 04:50:54
0 2016/12/28 04:50:46
Both of these have twin scroll turbos, the BMW has an m performance Ecu and intercooler, both make nearly 500 lb ft of torque
Both of these have twin scroll turbos, the BMW has an m performance Ecu and intercooler, both make nearly 500 lb ft of torque
0 2016/12/28 04:50:36
Need to play with the adjustment but at least I have an anti roll bar again now
Need to play with the adjustment but at least I have an anti roll bar again now
0 2016/12/27 08:31:00
0 2016/12/27 08:30:55