CPS (CrankPositionSensor)

Reply Subscribe

Thread Tools

Search this Thread

Jul 20, 2005 | 11:47 AM

rsboy82

Thread Starter

Regular Contributor

Joined: Feb 2005

Posts: 205

Likes: 0

From: Telford Shropshire

CPS (CrankPositionSensor)

basically what i need to know is there anyway around not using this or maching an Escort block to fit 1 because im in the middle of swoppin from FRST to ERST and it suddenly dawned on my about the CPS

Jul 20, 2005 | 10:18 PM

tomsxr3i

Virgin

Joined: Jul 2005

Posts: 11

Likes: 0

From: nottingham

sorry mate but there is no one that will do this cps sensor hole for you as i had the same problem i ended up buying another block sorry mate

Jul 21, 2005 | 12:12 AM

rsboy82

Thread Starter

Regular Contributor

Joined: Feb 2005

Posts: 205

Likes: 0

From: Telford Shropshire

cheers mate

Jul 21, 2005 | 02:17 PM

JesseT

PassionFord Post Troll

Joined: Jun 2003

Posts: 2,866

Likes: 0

From: Finland

It's a very easy job to drill the hole. Of course not averyone has a 30mm drill bit, neither did I so I drilled it to 20mm and then grinded the rest. The block is anyhow made of quite soft material.
If you really want to get around it you can use the Sierra CVH parts that have the 36-1 and sensor in the pulley side.