i'm needing 4 x injectors of at least 280cc

what colours can i look for and are all injectors the same fitment?

to be fitted to some jenvey t/b's and a mondeo/focus loom

 

low impedence or high impedence?

 

erm...

what does what? all i've been told is that i'm gonna need higher flow injectors

and have been given a simple equation of divide the flow rate in CC by 5, then multiply by the number of injectors you plan to use

am fitting a 2.0 blacktop zetec into a mk4 fiesta and running it on jenvey 45's (possibly 48's) and omex management

wanting about 250bhp, so my conclusion is 300cc injectors (300/5 = 60... x 4 = 240)

 

can someone please help? as far as i was aware before tday that injectors were pretty much all the same, just the flow rates differentiated

 

if you are going to be running omex i dont think it matters about the impedance but to fit a zetec fuel rail u will need side feed injectors. unless you fabricate 1 of your own to use end feed injectors like the frst which has a wider variety of performance injectors. hth

 

ring whoever it is that is going to be mapping ur omex for u and ask them what injectors they think u should use