Hi, I need to get my calipers off but cant get the top bolt off to undo them, the bolt is close to being rounded and I dont want to have to fook it completely, how else can I get them off? I know there are the alan key holes, but dont have the right size key? For my ERST by the way. Cheers.

 

<IFRAME marginWidth=0 marginHeight=0 src="http://buy1.snapon.com/catalog/pro_det.asp?P65=yes&tool=all&item_ID=5718&group_ID =588&store=snapon-store&dir=catalog" frameBorder=0 width=800 height=600></IFRAME>

Buy a 7mm allen key

 

apmsl! I just might have to Stu.

 

Sorry, thread hi-jack

Stu - how do you do that? Get a web page within a post I mean? I see MAD ANDY did it a while back and now you done it? I only get links come up in my posts

 

Splash out on a new allen key you tight git

 

Press ctrl and printscreen and then paste it into your paint program then upload it like any other image.

PJay

 

Thats how u put up a pic link, hes on about inserting a whole page link from the main source(URL) not by uploading it himself

and yea im interested to know how 2!!!!!!!!!

 

Oi Tiff, shut it!

And u two, hijakers!!!!

 

<IFRAME marginWidth=0 marginHeight=0 src="http://buy1.snapon.com/catalog/pro_det.asp?P65=yes&tool=all&item_ID=5718&group_ID =588&store=snapon-store&dir=catalog" frameBorder=0 width=800 height=600></IFRAME>

Like that, you can only do it if html is enabled which probably isn't!!!

PJay

 

But obviously is!!!

 

 

So? WTF do you do? What does the code look like?

Did it work?

 

 

 

god knows!

 

 

Like that but you need to put open and close arrows on it.

PJay

 

oh and lose the """"'s

PJay

 

So if I wanted to do this in a post where do I find that shit you posted to put in my post, and what are the open and close arrows? These : < > ???

 

You have to write it, or store it in a txt file then cut and paste.

<IFRAME marginWidth=0 marginHeight=0 src="http://passionford.webheberg.com/forum/viewtopic.php?t=21975" frameBorder=0 width=800 height=600></IFRAME>
To get this you need:

IFRAME marginWidth=0 marginHeight=0 src="http://passionford.webheberg.com/forum/viewtopic.php?t=21975" frameBorder=0 width=800 height=600></IFRAME


With these <,> at the start and end.

PJay

 

Yeah but what I am saying is Jay - where do I find this code to copy and paste? I can't jsut make it up? I tried rightclicking and going to properties and got nuffin.... So where do I find the code to copy and paste?

 

EEErrrrr, in my post.



IFRAME marginWidth=0 marginHeight=0 src="change this to the web address you want to display" frameBorder=0 width=800 height=600></IFRAME

PJay

 

<IFRAME marginWidth=0 marginHeight=0 src="http://www.machinemart.co.uk/" frameBorder=0 width=800 height=600></IFRAME>

 

Hurrah!

what I meant was Jay, that whole Iframe magin thing - I never seen it before so I wondered wher you got it from.... I will jsut save it as a text file now so I can copy it when I need it....

 

Its HTML code has been around for ever.

PJay

 

Oh, I'd never seen nor heard of it, lol....

 

Ok, now back to the original topic, i have managed to get the caliper off! WAHEY!!! Now, putting the pads back in is the prob, lol. U have the thre metal clips that obviosuly push inside the piston bit of the back of the caliper, but i cant get it to go in properly, what am i dong wrong?

 

Sorry Adam

 

The pad wont fit the piston, or the caliper wont go over the disc with the new pads in?

Have you pushed the piston back?

Neil.

 

No worrys mate! Can u help me, check the above post?

 

No the pad wont fit the piston, just seems as tho it wont go in but of course it does cos i just took em out, just cant get em back in. wot do i do put on end in first then push the clip back and slide it in or what?

 

With the caliper off the bracket, fit the inboard pad to the piston. Should be a peice of piss mate Just clips in

Then stick the outboard pad in the backet and slide the caliper over the disc and outer pad.

Neil.

 

Hi mate, yea done all that and now the calliper is back over the disc and ive tightened the bolts back up that hold the calliper to the hub, but my disc seems really loose and I dont know why, there shouldn't be play in it should there, pmsl!

 

Pump the pedal, and the play will be no more

Neil.

PS you should have someone do this while u make sure that the brakes are coming on before you even THINK about driving the car

 

AFPMSL, Yea, im a idiot, but i wouldnt have even put the wheel back on like it is!!! CheeRS mate.

 

NB mate

Neil.

 

Big thanks to Neil S. Top bloke. Helped me out when no other bastid on here would help when I asked! CheeRS mate. Thanks alot. Got it all back together and is fine, and so far so good no squeak. I think God is punishing me tho, I just pulled back inthe garage and there is a 3 inch screw sticking out the side of my tyre, in my mint front goodyear eagle venturas! Fucked and I bet they cant repair it! I need two new back tyres, why could it not go in them! BOLLOX!!

Cheers again Neil!

 

So easy you DUMMY PMSL ;

 

pmsl. Yea, I know, but I can only do easy things, and now I have done it I can do it again easy.

 

first time for everything matey