tips and advice needed here please

if all goes well in the next few weeks a T34 will be landing on my doorstep to be fitted to my 2wd saph. it's already running a "stage 2" set up consisting of:

ahmed bayjoo 330 chip

RS500 intercooler

803's

3 bar map sensor

-31 actuator

"group a" cone filter

full mongoose stainless exhaust.

now basicly what i'm wondering is what am i going to be looking at adjusting or changing along with obviously the turbo? a guy on rsoc says i need a new chip, is that right even though it's the 330 chip? i'm guessing the fueling will need to be adjusted?

ok obviously i'm pissing in the wind a bit really because i've never done anything like this before so if anyone who has already done this could give me some pointers i'd be very very gratefull!

cheers
john

 

M8 the turbo should go straight on
but you will need a new chip
as the T34 flows more air...

 

I believe it only flows more air at the higher rev range which is where the power is!!!

speak to stu he will be able to sort you one out



john