im puttin my head back on my s2rs turbo and i dont know the tourqe settins for the head bolts can any 1 help me with the tightning settins wot order do i do um in and how tight thanks in advance for help

 

alrite m8 . make sure the head bolt holes havnt got any oil in them as it can crack the block when u do the head bolts up . looking at the engine from the front you have 2 rows of 5 bolts .
1st bolt is front row middle
2nd bolt is back row middle
3rd bolt is front row to the right of the middle
4th bolt is back row to the left of the middle
5th bolt is front row to the left of the middle
6th bolt is back row to the right of the middle
7th bolt is front row far left
8th bolt is back row far right
9th bolt is front row far right
10th bolt is back row far left
torque settings
1st stage 18 lbf ft
2nd stage 40 lbf ft
3rd stage tighten 90 degrees
4th stage tighten further 90 degrees

 

thanks for the info top lad