Focus Fusebox Compatibility 2010 2.0 tdci
#1
Damn Cars
Thread Starter
Focus Fusebox Compatibility 2010 2.0 tdci
I need a new fusebox for my 2010 2.0 tdci, which numbers do I need to match to get the right one? Does it have to be keyless specific as my car is?
#2
PassionFord Post Whore!!
The part number is the 7M5T-14A073-JF. I THINK the 8M5T number is software for the BCM (body control module/fuse box)
i'd be aware its not going to be a case of just whacking a fuse box in, there will need to be some degree of coding in the as-built data and coding of immobilizer/keys.
I fitted a new one to a Focus mk3 and it came with different pin layouts etc in the end had to have the Ford field engineer down to help install the damn thing..
i'd be aware its not going to be a case of just whacking a fuse box in, there will need to be some degree of coding in the as-built data and coding of immobilizer/keys.
I fitted a new one to a Focus mk3 and it came with different pin layouts etc in the end had to have the Ford field engineer down to help install the damn thing..
Last edited by GVK.; 02-05-2019 at 02:24 AM.
The following users liked this post:
deathrider666 (01-05-2019)
#3
Damn Cars
Thread Starter
The part number is the 7M5T-14A073-JF. I THINK the 8M5T number is software for the BCM (body control module/fuse box)
i'd be aware its not going to be a case of just whacking a fuse box in, there will need to be some degree of coding in the as-built data and coding of immobilizer/keys.
I fitted a new one to a Focus and it came with different pin layouts etc in the end had to have the Ford field engineer down to help install the damn thing..
i'd be aware its not going to be a case of just whacking a fuse box in, there will need to be some degree of coding in the as-built data and coding of immobilizer/keys.
I fitted a new one to a Focus and it came with different pin layouts etc in the end had to have the Ford field engineer down to help install the damn thing..
I did order one with that number, I did see ones with different 2 letters at the end but thought I'd best get one exactly the same.
Is the coding only done by ford or can it be done by someone with the right equipment?
#5
Damn Cars
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
ceausescu247
General Car Related Discussion.
6
08-12-2016 05:52 PM
RS500
Pictures, video & Photoshop Forum
12
22-05-2010 10:28 PM
AL_Capino
Shows & Track Days
12
13-03-2010 01:30 AM