I have bought RS500 clocks with the intergral boost gauge to fit in my saff. The problem is the connector is diffrent. I have source a connector but do i just cut off the saff connector and join the like for like colours together. Any help would be greatly appreciated as this is one of the last jobs to do before shes back on the road. Summer here!!!!!!!!!

 

Think its just a rubber or plastic pipe goes on the back. I just left mine disconnected & cut the pipe when i fitted the gauge in the vent hole. Just run the pipe through & connect onto the inlet manifold

 

The boost gauge i have sorted no problem, its the wiring connector that the problem. The 3 door clocks connector is diffrent from the saff

 

well i no its not the same but i put rs turbo clocks in my mates car and the connector wasnt the same.. but cut it and wired it up coulor 4 colour and it workd fine..... i think it should be ok m8.....

 

do you have a 4wd ? I fitted straight one into my 2wd no prob,