When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am converting the front brakes to cosworth calipers and discs but the carriers are hitting the ABS on the hubs. Can any one tell me if I need to change the hubs?
Thanks for the info but unfortunately I was told the cossy 4x4 fit straight on so I went and bought everything. I'll just have to remove the ABS system and put them on.
Thanks for the info but unfortunately I was told the cossy 4x4 fit straight on so I went and bought everything. I'll just have to remove the ABS system and put them on.
I would send the bill to whoever told you they fit straight on and to remove abs for a set of calipers is stir crazy its only a gti after all
When you say pretty muchfit straight on what do you mean? What has to be done to fit them and is it mk1 st170
st170 is only a mk1 facelift and the front brakes totally bolt straight on, the only job to do is simply widening the mounting hole which is very very easy and a 2 minute job unless you are clueless at car DIY
st170 is only a mk1 facelift and the front brakes totally bolt straight on, the only job to do is simply widening the mounting hole which is very very easy and a 2 minute job unless you are clueless at car DIY
That I could manage that lol. Thanks for your help
Mk7 escort GTi brake conversion
easier to find mk3 mondy ones though and use st170 discs 
