s1
01-03-2005, 09:48 PM
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Feb 2005
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
s1
hiya everyone, just wonderd what i would need to do to make an s1 rs turbo up to 170+bhp, and how reliable would it be? thanks.
and any rough prices would be nice.
and any rough prices would be nice.
01-03-2005, 10:52 PM
#2
I've found that life I needed.. It's HERE!!
Join Date: Apr 2004
Location: South East
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
A chip and a -31 actuator, decent filter, exhaust system, and a rolling road set up should see around 175+bhp with 14lbs of boost. Should be reliable enough with this amount of power. Pricewise your looking at around £800 with everything done by a professional garage.
09-03-2005, 09:13 PM
#3
Regular Contributor
Join Date: Jul 2003
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
When my S1 had a Magnex, K&N panel filter and a Bayjoo chip it made 164 bhp on Noble's rollers at 13 psi and that was on the standard IC.
That lot cost me about £800 and I fitted everything but the chip myself.
Chip was done at Castle Performance.
Colin.
That lot cost me about £800 and I fitted everything but the chip myself.
Chip was done at Castle Performance.
Colin.