will
Thread Starter
I'm Finding My Feet Here Now
Joined: Oct 2009
Posts: 126
Likes: 0
From: gillingham kent
The 1.6 zetec is different in design to the 1.8 and 2.0 so very little is interchangeable. Cams and throttle bodies would see the most gains. Have a look for fiesta zetec s tuning as I believe they have the same engine as your focus
Thread Starter
I'm Finding My Feet Here Now
Joined: Oct 2009
Posts: 126
Likes: 0
From: gillingham kent
Wot throttle bodys wod fit and wot wod I take off zetec s if its same engine
http://www.ebay.co.uk/itm/Omex-Throt...ht_1055wt_1064
Thread Starter
I'm Finding My Feet Here Now
Joined: Oct 2009
Posts: 126
Likes: 0
From: gillingham kent
Iv just found out that iv not ever got an exhurst system on my car its all standerd apart from bk box so got to get one soon when I find out wot is wrong with my car
Trending Topics
The similarity ends with the name with the larger engines (Zetec-E), they are completely different and bare no resemblance.
Martin
Thread Starter
I'm Finding My Feet Here Now
Joined: Oct 2009
Posts: 126
Likes: 0
From: gillingham kent
Your engine is the Zetec S! You can get around 140HP, you need exhaust, induction and cams, remap etc, this is a featured package from Shaw Speed, it's not that cheap however!
The similarity ends with the name with the larger engines (Zetec-E), they are completely different and bare no resemblance.
Martin
The similarity ends with the name with the larger engines (Zetec-E), they are completely different and bare no resemblance.
Martin
Zetec SE AKA Zetec S AKA Sigma, same engine!
Phase 1 engines, with the metal cam cover had Zetec S on the cover later ones, had the black cam cover which you will have with Zetec SE written in white/grey writing. Earlier models had this scribed into the cam cover
Example:
Your engine:
Phase 1 engine:
This is the one and only avaliable engine in this capacity for the car, the 1.4 is also the same engine.
Martin
Phase 1 engines, with the metal cam cover had Zetec S on the cover later ones, had the black cam cover which you will have with Zetec SE written in white/grey writing. Earlier models had this scribed into the cam cover
Example:
Your engine:
Phase 1 engine:
This is the one and only avaliable engine in this capacity for the car, the 1.4 is also the same engine.
Martin
Last edited by martysmartie; Sep 27, 2011 at 06:09 PM.
Thread Starter
I'm Finding My Feet Here Now
Joined: Oct 2009
Posts: 126
Likes: 0
From: gillingham kent
Zetec SE AKA Zetec S AKA Sigma, same engine!
Phase 1 engines, with the metal cam cover had Zetec S on the cover later ones, had the black cam cover which you will have with Zetec SE written in white/grey writing. Earlier models had this scribed into the cam cover
Example:
Your engine:
Phase 1 engine:
This is the one and only avaliable engine in this capacity for the car, the 1.4 is also the same engine.
Martin
Phase 1 engines, with the metal cam cover had Zetec S on the cover later ones, had the black cam cover which you will have with Zetec SE written in white/grey writing. Earlier models had this scribed into the cam cover
Example:
Your engine:
Phase 1 engine:
This is the one and only avaliable engine in this capacity for the car, the 1.4 is also the same engine.
Martin
Thread Starter
I'm Finding My Feet Here Now
Joined: Oct 2009
Posts: 126
Likes: 0
From: gillingham kent
You need to discover how the speed is being raised, it can only do so via the ISCV or the throttle, unless you have an air leak else where. If the former then an incorrect input to the ECU will be telling the valve to operate in this way.
Martin
Martin
Thread Starter
I'm Finding My Feet Here Now
Joined: Oct 2009
Posts: 126
Likes: 0
From: gillingham kent
Sorry iv not got a clue wot u r on about but put it on computer and cum up with no codes at all so now im lost on wot it can b
