Well removed the st3 engine to day and changed it for a 16k mile one, and not i am stuck on were three items go as below can someone please tell me were they go or a diagram will be great

This on i am looking for the vac pipe for the turbo inlet pipe



This one were does it go to its a vac pipe from the brake servo well it splits off from it near the battery



and this is the last on near the head light about a foot of wire on it



many thanks

 

Pretty sure the cable on the second picture goes into the boost hose. The other connector from memory clips into the airbox. Not 100% sure on that one though...

 

so you are saying pic 2 connects to pic 1 ?

 

Yeah I have disconnected it in the past when putting on the dreamscience induction kit.

From memory when I removed the standard airbox I had to unclip an electrical connector which was not used on the new induction kit

 

hope you are all right lol

 

I am right with the first connector mate. It will just click on.

Have a look at your airbox and see if the connector fits.

 

cheers fella i will, nothing worse than standing looking at an engine for an hr figuring it out only for some one to come and say o look there it goes in 5 mins lol, this is why i not wanting to get anyone to look ha

 

95% sure that pic 2 fits to pic 1. If you havent sorted it by tomorrow i'll check my car out for you.

 

Still stuck on the final pic fellas it does not go the the airbox at all

 

If anybody can look it is a thin with that times of just before the big connection from the rad fan. Just behind your passenger side headlight

 

I'll have a look tomorrow for you.