Big problems using Dreamscience
13-10-2010, 07:55 PM
#1
Virgin
Thread Starter
Join Date: Oct 2010
Location: uk
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Big problems using Dreamscience
Just bought a DSF3000 
and after talking to dreamscape on the phone and them telling me I just had to unlock the unit and it would be ok.
The previous owner used it on a 2002 thunder and my car is a '99 millennium.He told me there were 4 lives left after only using it once.
Just tried it and I think I may have wiped the chip in the ECU.
When I tried to load a tune,it just failed after about 70% of downlaoding giving an error message.
I then put it back to stock but now there is absolutely nothing when I turn the key,just lots of lights on the dash.
Any help or ideas to get this sorted would be appreciated............
Paul
and after talking to dreamscape on the phone and them telling me I just had to unlock the unit and it would be ok.The previous owner used it on a 2002 thunder and my car is a '99 millennium.He told me there were 4 lives left after only using it once.
Just tried it and I think I may have wiped the chip in the ECU.
When I tried to load a tune,it just failed after about 70% of downlaoding giving an error message.
I then put it back to stock but now there is absolutely nothing when I turn the key,just lots of lights on the dash.
Any help or ideas to get this sorted would be appreciated............
Paul
13-10-2010, 08:48 PM
#3
Virgin
Thread Starter
Join Date: Oct 2010
Location: uk
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
The cars mentioned.......ford puma thunder 02 plate.....ford puma millenium 'V' plate.
I thought this was a ford forum
Last edited by spit; 13-10-2010 at 08:49 PM.
13-10-2010, 09:11 PM
#4
Yes this is a ford forum, but a fair few different models used the thunder and the millenium editions, so how is anyone to know what you're on about.
The DSF3000 is a custom tune unit, so you can load any map onto it that you like, not just the ones that are preloaded by DS.
My dreamscience unit has a failsafe so just incase it does cock up, then it will automatically reset and stick the standard map back to the car for you. I take it this didn't happen?
13-10-2010, 10:11 PM
#5
Virgin
Thread Starter
Join Date: Oct 2010
Location: uk
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Yes this is a ford forum, but a fair few different models used the thunder and the millenium editions, so how is anyone to know what you're on about.
The DSF3000 is a custom tune unit, so you can load any map onto it that you like, not just the ones that are preloaded by DS.
My dreamscience unit has a failsafe so just incase it does cock up, then it will automatically reset and stick the standard map back to the car for you. I take it this didn't happen?
The DSF3000 is a custom tune unit, so you can load any map onto it that you like, not just the ones that are preloaded by DS.
My dreamscience unit has a failsafe so just incase it does cock up, then it will automatically reset and stick the standard map back to the car for you. I take it this didn't happen?
Don't think so mate.
I tried downloading the stock prog. without any luck.
Hope I can just take the ECU,when I find it,back to ford as the car cannot be driven.
Thread
Thread Starter
Forum
Replies
Last Post
