bleed valves
03-12-2009, 12:32 PM
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Nov 2009
Location: scunthorpe
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
bleed valves
can someone tell me the one i need for my rst i have no amal valve and ther is not one fitted and i want one a.s.a.p before it causes any problems
do i need a three port or a two
if i use one of these (pic below) dose the third pipe go to the metering unit as ther is a pipe blocked off ther
or do i just use one of these (pic below) inbetween actuator and the turbo unit
do i need a three port or a two
if i use one of these (pic below) dose the third pipe go to the metering unit as ther is a pipe blocked off ther
or do i just use one of these (pic below) inbetween actuator and the turbo unit
03-12-2009, 03:52 PM
#3
just a 2 port will be fine,
check our ebay shop for good prices.
http://stores.shop.ebay.co.uk/Motors...__W0QQ_armrsZ1
always monitor fuelling and for det when playing with boost level.
check our ebay shop for good prices.
http://stores.shop.ebay.co.uk/Motors...__W0QQ_armrsZ1
always monitor fuelling and for det when playing with boost level.
Last edited by JTECH James; 03-12-2009 at 03:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post