cosworth starting problems
#1
cossie
Thread Starter
Join Date: Jan 2007
Location: essex
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
cosworth starting problems
hi i've just done an engine rebuild on my sierra sapphire 2wd. i have put the engine back in but there is no spark at the spark plugs? thought it may have been the coil but tested the coil and it has a good spark. changed the dizzy cap and rotor arm still no spark. can anyone help me? i have put brand new motorsport leads on the car aswell.
#3
20K+ Super Poster.
Do you have a pump prime when you first switch on first thing of the day ?
If yes you know you are getting a cps signal, if not look at this, I think it is possible to accidentally mix up the cps and dizzy terminal connectors, especially if connector on cps has been changed to black, can't remember if both side were white or just the connector side and not the loom side.
I would just go through everything and recheck bound to be something daft and silly that you will slap yourself for when you see it!!
tabetha
If yes you know you are getting a cps signal, if not look at this, I think it is possible to accidentally mix up the cps and dizzy terminal connectors, especially if connector on cps has been changed to black, can't remember if both side were white or just the connector side and not the loom side.
I would just go through everything and recheck bound to be something daft and silly that you will slap yourself for when you see it!!
tabetha
Thread
Thread Starter
Forum
Replies
Last Post